Understanding your contingency power connection needs
IDE has over 25 years' experience in designing power distribution solutions. With direct access to our skilled engineers, we can help you understand and specify solutions for generator connection.
Highest reliability components and switchgear
You need to know that, when it's needed, the contingency power can be relied upon. We use the highest quality switchgear in all our products, giving you confidence.
Site survey and installation
We provide site surveys to advise on positioning and power connection and switching requirements, and can also install if required.
Long term partnership
We innovate to suit the needs of our customers and can create bespoke products and services to match your capital and operational budgets.
Available 1600A to 3200A - the free standing Generator Connection Point is designed to restore power to critical applications and can be fitted inside or outside of a building, allowing a safe and quick connection of a back-up generator to your facility’s electrical system when required. This solution can be engineered to suit the requirements of your project and is used to restore power to critical applications such as hospitals, schools, airports, banks and other commercial facilities.
3200A three-phase, neutral and earth Generator Connection Point designed to restore power to critical applications. The…
3200A three-phase, neutral and earth Generator Connection Point designed to restore power to critical applications. The 3200A Generator Connection Point can be fitted inside or outside of a building, allowing a safe and quick connection of a back-up generator to your facility’s electrical system when required.
Equipment housed within a steel enclosure. Powerlock (Drain) connections to 100x10mm copper bars with 300mm spreading distance for bottom entry outgoing cables. 3mm aluminium top and bottom gland plates are provided for the customer
Dark Grey (RAL7021) textured powder coated stainless steel construction (1.4003 grade). Other colour options maybe available by request. Powerlocks mounted on a 45 degree angle aluminum plate. 3mm aluminum top and bottom gland plates are provided. Assembled to IP54.
- Incomer: 3P + N + E 500A Powerlock Drain . Protection: N/A
- Outgoing: 10 x 10 copper bars c/w M12 clearance holes. Protection: N/A
- Dimensions: H18350 x W950 x D360 (mm)
- Weight – 150kg
We recommend the generator should be connected / disconnected when off load and not running. No voltage should be present at the powerlocks. We would also recommend following the convention of connecting in the following order: Earth – Neutral – L1 – L2 – L3. Then disconnecting in the reverse order.
All temporary power distribution equipment is manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification). The products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty.
For more information on our Generator Connection Points please contact firstname.lastname@example.org.
Not found what you are looking for? Fill in the form below and one of our IDE Advisors will contact you, to go through your requirement in more detail.