Temporary Power

Understanding your temporary power distribution needs

IDE has over 25 years' experience in designing power distribution solutions. With direct access to our skilled engineers, we can help you understand and specify solutions for any event.

Optimising your temporary power distribution network

IDE supplies a full range of temporary power distribution panels from 4000A generator connections to small dual 16A sockets, and all connecting cable to ensure you optimise your temporary power network. We fit the product to the application.

Quality and safety assured

Every time any of our products leave our rental depot or manufacturing base, we test operation and safety. This includes EVERY socket, EVERY breaker, EVERY cable connection to ensure the highest reliability.

Long-term partnership

We can help you plan ahead, ensuring you get the best from your temporary power distribution set-up and our expert services. We can also manage your complete distribution fleet, or provide one stop rental management.

63A power distribution boards designed to distribute temporary power from one area to another. The plug and play 63A power distribution boards are easy to relocate across site and blend in well with the surrounding environment. All event power distribution boards can be fitted with an emergency stop button as an additional safety feature and USB sockets which allow for on-site device charging. If you can't find what you are looking for, give us a call - our trusted advisors are on-hand to find the right solution for you. All of our event power distro boards are available to purchase or hire.

  • MD2

    A 63 amp 3 phase distribution board designed to distribute temporary power from one area to another. The 63 amp 3 phase…

    A 63 amp 3 phase distribution board designed to distribute temporary power from one area to another. The 63 amp 3 phase distribution board features a plug and play design, which makes it easy to relocate across site and blends in with the surrounding environment. All switchgear and Tri-rated wiring is housed within a purpose built high density polyethylene enclosure (HDPE), with recessed socket and switchgear panels for mechanical protection. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The enclosure incorporates integrated carry handles, common stacking rails, external brass earth stud and all necessary electrical hazard warning identification.

    The enclosure is fabricated from black 10mm thick 300-grade high density polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, service temperature from -50 to +80°C with greater than 1014 surface resistance. IK09 Rated.

    Specification:

    • Incomer: 63A 4P MCB
    • Outgoing: 1 x 63a/3
    • Outgoing: 6 x 32a/1
    • Outgoing: 12 x 16a/1
    • Dimensions H600 x W550 x D495 (mm)
    • Weight – 32kg (2 people)

    All temporary power distribution boxes are manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty.

  • MD74

    A 63 amp 3 phase distribution board designed to distribute temporary power from one area to another. The 63 amp 3 phase…

    A 63 amp 3 phase distribution board designed to distribute temporary power from one area to another. The 63 amp 3 phase distribution board features a plug and play design, which makes it easy to relocate across site and blends in with the surrounding environment. All switchgear and Tri-rated wiring is housed within a purpose built high density polyethylene enclosure (HDPE), with recessed socket and switchgear panels for mechanical protection. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The enclosure incorporates integrated carry handles, common stacking rails, external brass earth stud and all necessary electrical hazard warning identification.

    The enclosure is fabricated from black 10mm thick 300-grade high density polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, service temperature from -50 to +80°C with greater than 1014 surface resistance. IK09 Rated.

    Specification:

    • Incomer: 125A 4P MCCB
    • Outgoing: 1 x 63a/3
    • Outgoing: 2 x 32a/3
    • Outgoing: 6 x 32a/1
    • Outgoing: 6 x 16a/1
    • Dimensions H450 x W550 x D495 (mm)
    • Weight – 28kg (2 people)

    All temporary power distribution boxes are manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty.

  • MD51

    Three-phase mains distribution unit for use on any temporary electrical installation. Equipment housed in a solid cast…

    Three-phase mains distribution unit for use on any temporary electrical installation. Equipment housed in a solid cast rubber spider enclosure, with integrated transparent Modular window protected Switchgear, fixed carry handle and rising feet for ease of stacking. Inlet on a rated flying H07RN-F lead to aid connection to generator or distribution board.

    Enclosure
    Resistant to atmospherics and chemical agents. IP55 Rated.

    Specification:

    • Incomer: 125A 4P MCCB
    • Outgoing: 1 x 32a/3
    • Outgoing: 3 x 32a/1
    • Dimensions: H350 x W450 x D400 (mm)
    • Weight: 13kg (1 person)

    All temporary power distribution boxes are manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty.

  • MD41 Spider Box

    A 63A 3 phase (400V) rubber box distro designed to distribute temporary power from one area to another. The 63A 3 phase…

    Rubber box distro

    A 63A 3 phase (400V) rubber box distro designed to distribute temporary power from one area to another. The 63A 3 phase rubber box distro has a plug and play design, which makes it easy to relocate across site and blends in with the surrounding environment. All switchgear and Tri-rated wiring is housed within a solid case rubber box enclosure.  Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The enclosure incorporates integrated carry handles, common stacking rails, external brass earth stud and all necessary electrical hazard warning identification.

    The enclosure is black, self extinguishing, fully insulated, stackable, hard butyl, rubber spider, with high resistance to chemical agents, atmospherics and current leakage

    Specification:

    • Incomer: 63A 400V 3P+N+E IP67 Appliance Inlet. Protection: No
    • Outgoing: 3 x 63A 230V 1P+N+E IP67 Pnl Mnt Skt. Protection: 3 x 63A 2 Pole C-Type MCB
    • Dimensions H350 x W450 x D400 (mm)
    • Weight – 17kgs

    All temporary power distribution boxes are manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty. All IDE products are fitted with Mennekes sockets and ABB switchgear. For more information on this product, please contact sales@idesystems.co.uk.

  • MD38

    A 63 amp 3 phase distribution board designed to distribute temporary power from one area to another. The 63 amp 3 phase…

    63 amp 3 phase distribution board

    A 63 amp 3 phase distribution board designed to distribute temporary power from one area to another. The 63 amp 3 phase distribution board features a plug and play design, which makes it easy to relocate across site and blends in with the surrounding environment. All switchgear and Tri-rated wiring is housed within a purpose built high density polyethylene enclosure (HDPE), with recessed socket and switchgear panels for mechanical protection. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The enclosure incorporates integrated carry handles, common stacking rails, external brass earth stud and all necessary electrical hazard warning identification.

    The enclosure is fabricated from black 10mm thick 300-grade high density polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, service temperature from -50 to +80°C with greater than 1014 surface resistance. IK09 Rated.

    Specification:

    • Incomer: 63A 400V 3P+N+E IP67 Appliance Inlet. Protection: 63A 4 Pole C-Type MCCB
    • Outgoing: 63A 400V 3P+N+E IP44 Pnl Mnt Skt. Feedthrough not protected
    • Outgoing:2 x 32A 400V 3P+N+E IP44 Pnl Mnt Skt. Protection: 2 x 32A 4Pole C-Type MCB c/w Adjustable Earth Leakage
    • Outgoing:3 x 32A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 3 x 32A 2 Pole 30mA C-Type RCBO
    • Outgoing:9 x 16A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 9 x 16A 2 Pole 30mA C-Type RCBO
    • Dimensions H600 x W550 x D495 (mm)
    • Weight – 36kg

    All temporary power distribution boxes are manufactured by ide Systems Ltd in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty. All IDE power distribution products use ABB Switchgear and Mennekes sockets. For more information on this product, or to contact us regarding a bespoke build, please send your enquiry to:  sales@idesystems.co.uk.

  • MD63

    63A three-phase mains distribution unit designed to distribute temporary power from one area to another. The 63A 3 phase…

    63A Event Distribution Board

    63A three-phase mains distribution unit designed to distribute temporary power from one area to another. The 63A 3 phase plug and play distribution board is easy to relocate across site and blends in with the surrounding environment. Equipment housed in a polyethylene enclosure, with recessed Socket and Switchgear panels for mechanical protection.  Enclosure incorporates integrated lifting handles and rails for ease of handling and stacking. Inlet supply has phase rotation monitor and each outlet has a red ‘Power On’ neon light. External brass earth stud.

    The enclosure is fabricated from black 10mm thick 300-Grade High Density Polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, impact strength of 10 kJ/m², service temperature from -50 to +80°C, with greater than 1014Ω surface resistance. IP55 Rated.

    Specification:

    • Incomer: 63A 400V 3P+N+E IP67 Appliance Inlet. Protection: 63A 4 Pole MCCB
    • Outgoing: 63A 400V 3P+N+E IP44 Pnl Mnt Skt. Feedthrough not protected
    • Outgoing: 3 x 32A 400V 3P+N+E IP44 Pnl Mnt Skt. Protection: 3 x 32A 4 Pole 30mA RCBO
    • Outgoing: 6 x 32A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 6 x 32A 2 Pole 30mA RCBO
    • Outgoing: 6 x 16A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 6 x 16A 2 Pole 30mA RCBO
    • Dimensions H600 x W550 x D495 (mm)
    • Weight – 34kg
  • MD52

    A 63A three-phase (400V) power distribution box designed to distribute temporary power from one area to another. The 63A…

    63A 3 Phase Event Distro

    A 63A three-phase (400V) power distribution box designed to distribute temporary power from one area to another. The 63A 3 phase plug and play distribution board is easy to relocate across site and blends in well with the surrounding environment. All switchgear and Tri-rated wiring is housed within a purpose built polyethylene enclosure, with recessed socket and switchgear panels for mechanical protection. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The enclosure incorporates integrated carry handles, common stacking rails, external brass earth stud and all necessary electrical hazard warning identification.

    The enclosure is fabricated from black 10mm thick 300-grade high density polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, service temperature from -50 to +80°C with greater than 1014 surface resistance. IK09 Rated.

    Specification:

    • Incomer: 63A 400V 3P+N+E IP67 Appliance Inlet. Protection: 63A 4 Pole C-Type MCB
    • Outgoing: 32A 400V 3P+N+E IP44 Pnl Mnt Skt. Protection: 32A 4 Pole 30mA RCBO
    • Outgoing: 3 x 32A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 3 x 32A 2 Pole 30mA RCBO
    • Outgoing: 12 x 16A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 12 x 16A 2 Pole 30mA RCBO
    • Outgoing: 63A 400V 3P+N+E IP67 Pnl Mnt Skt. Protection: N/A
    • Dimensions H600 x W550 x D495 (mm)
    • Weight – 33kg

    All temporary power distribution boxes are manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty.

  • MD50

    A 63A three-phase (400V) power distribution box designed to distribute temporary power from one area to another. The…

    63A 3 Phase Distro

    A 63A three-phase (400V) power distribution box designed to distribute temporary power from one area to another. The 63A 3 phase plug and play distribution board is easy to relocate across site and blends in well with the surrounding environment.All switchgear and Tri-rated wiring is housed within a purpose built polyethylene enclosure, with recessed socket and switchgear panels for mechanical protection. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The enclosure incorporates integrated carry handles, common stacking rails, external brass earth stud and all necessary electrical hazard warning identification.

    The enclosure is fabricated from black 10mm thick 300-grade high density polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, service temperature from -50 to +80°C with greater than 1014 surface resistance. IK09 Rated

    Specification:

    • Incomer: 63A 400V 3P+N+E IP67 Appliance Inlet. Protection: 63A 4 Pole C-Type MCB
    • Outgoing: 3 x 32A 400V 3P+N+E IP44 Pnl Mnt Skt. Protection: 3 x 32A 4 Pole 30mA RCBO
    • Outgoing: 3 x 16A 400V 3P+N+E IP44 Pnl Mnt Skt. Protection: 3 x 16A 4 Pole 30mA RCBO
    • Dimensions H450 x W550 x D495 (mm)
    • Weight – 33kgs

    All temporary power distribution boxes are manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty.

Not found what you are looking for? Fill in the form below and one of our IDE Advisors will contact you, to go through your requirement in more detail.

  • One of our friendly team members will get back to you

Your quote list
Your quote list is empty.