Temporary Power

Understanding your temporary power distribution needs

IDE has over 25 years' experience in designing power distribution solutions. With direct access to our skilled engineers, we can help you understand and specify solutions for any event.

Optimising your temporary power distribution network

IDE supplies a full range of temporary power distribution panels from 4000A generator connections to small dual 16A sockets, and all connecting cable to ensure you optimise your temporary power network. We fit the product to the application.

Quality and safety assured

Every time any of our products leave our rental depot or manufacturing base, we test operation and safety. This includes EVERY socket, EVERY breaker, EVERY cable connection to ensure the highest reliability.

Long-term partnership

We can help you plan ahead, ensuring you get the best from your temporary power distribution set-up and our expert services. We can also manage your complete distribution fleet, or provide one stop rental management.

Erica enabled products provide real time monitoring and data capture, and work with IDE’s remote monitoring and analysis solutions.  They can be specified with WIFI or 4G connectivity. See our Erica page for more information

  • MD2-e

    A 63A three-phase (400V) power distribution box designed to distribute temporary power from one area to another. The 63A…

    A 63A three-phase (400V) power distribution box designed to distribute temporary power from one area to another. The 63A plug and play temporary power distribution board is easy to relocate across site and blends in with the surrounding environment. All switchgear and Tri-rated wiring is housed within a purpose built high density polyethylene enclosure (HDPE) , with recessed socket and switchgear panels for mechanical protection. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The enclosure incorporates integrated carry handles, common stacking rails, external brass earth stud and all necessary electrical hazard warning identification.

    The enclosure is fabricated from black 10mm thick 300-grade high density polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, service temperature from -50 to +80°C with greater than 1014 surface resistance. IK09 Rated.

    Specification:

    • Incomer: 63A 400V 3P+N+E IP67 Appliance Inlet. Protection: 63A 4 Pole C-Type MCB
    • Outgoing: 6 x 32A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 6 x 32A 2 Pole 30mA RCBO
    • Outgoing: 12 x 16A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 12 x 16A 2 Pole 30mA RCBO
    • Outgoing: 63A 400V 3P+N+E IP67 Pnl Mnt Skt (through). Protection: N/A
    • Dimensions: H610 x W525 x D470 (mm)
    • Weight – 32kg

    All temporary power distribution equipment is manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification). The products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty. All IDE temporary power distribution boxes are built with Mennekes sockets and ABB switchgear as standard.

  • MD32-e

    A 125A three-phase (400V) power distro box designed to distribute temporary power from one area to another. The 125A…

    A 125A three-phase (400V) power distro box designed to distribute temporary power from one area to another. The 125A distro is plug and play which means that it is easy to relocate across site and blends in well with the surrounding environment. All switchgear and Tri-rated wiring is housed within a purpose built high density polyethylene enclosure, with recessed socket and switchgear panels for mechanical protection. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The enclosure incorporates integrated carry handles, common stacking rails, external brass earth stud and all necessary electrical hazard warning identification.

    The enclosure is fabricated from black 10mm thick 300-grade high density polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, service temperature from -50 to +80°C with greater than 1014 surface resistance. IK09 Rated.

    Specification:

    • Incomer: 125A 400V 3P+N+E IP67 Appliance Inlet. Protection: 125A 4 Pole MCCB
    • Outgoing: 63A 400V 3P+N+E IP44 Pnl Mnt Skt. Protection: 63A 4 Pole C-Type MCB
    • Outgoing: 2 x 32A 400V 3P+N+E IP44 Pnl Mnt Skt. Protection: 2 x 32A 4 Pole 30mA RCBO
    • Outgoing:12 x 32A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 12 x 32A 2 Pole 30mA RCBO
    • Outgoing: 6 x 16A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 6 x 16A 2 Pole 30mA RCBO
    • Dimensions: H600 x W550 x D495 (mm)
    • Weight – 41kg

    All temporary power distribution equipment is manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification). The products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty. All IDE temporary power distros are built with Mennekes sockets and ABB switchgear as standard.

  • MD402-e

    A 400A three-phase (400V) powerlock distribution board designed to distribute temporary power from one area to another.…

    A 400A three-phase (400V) powerlock distribution board designed to distribute temporary power from one area to another. The 400A plug and play distribution board is easy to relocate across site and blends in well with the surrounding environment. User has the option to hardwire into the standby generator using powerlock or lugged terminations. All switchgear and Tri-rated wiring is housed within a purpose built polyethylene enclosure, with recessed socket and switchgear panels for mechanical protection. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The inlet supply has a phase rotation monitor and each outlet has a red ‘Power On’ neon light. External brass earth stud. Complete unit mounted within a stainless steel crash frame with forklift pockets.

    The enclosure is fabricated from black 10mm thick 300-grade high density polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, service temperature from -50 to +80°C with greater than 1014 surface resistance. IK09 Rated.

    Specification:

    • Incomer: 400A 400V 3P+N+E Powerlock Drain Connectors. Protection: 400A 4 Pole MCCB
    • Outgoing: 400A 400V 3P+N+E Powerlock Source Connectors(through). Protection: N/A
    • Outgoing: 3 x 125A 400V 3P+N+E IP67 Pnl Mnt Skt. Protection: 3 x 125A 4 Pole MCCB c/w Adjustable/Switchable Earth Leakage
    • Outgoing: 3 x 63A 400V 3P+N+E IP67 Pnl Mnt Skt. Protection: 3 x 63A 4 Pole C-Type MCB & 100mA RCD
    • Outgoing: 3 x 63A 230V 1P+N+E IP67 Pnl Mnt Skt. Protection: 3 x 63A 2 Pole C-Type MCB & 100mA RCD
    • Outgoing: 3 x 32A 400V 3P+N+E IP67 Pnl Mnt Skt. Protection: 3 x 32A 4 Pole 30mA C-Type RCBO
    • Outgoing: 2 x 16A 230V 1P+N+E IP67 Pnl Mnt Skt. Protection: 2 x 16A 2 Pole 30mA C-Type RCBO
    • Dimensions:H1392 x W612 x D495
    • Weight 110kgs

    All temporary power distribution equipment is manufactured by IDE  in the UK and tested to BS 7671 (12 Months Certification). The products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty.

  • SD200-e

    200A temporary site distribution board designed for use on construction sites and temporary electrical installations.…

    200A temporary site distribution board designed for use on construction sites and temporary electrical installations.

    The 200A temporary site distribution board is manufactured from stainless steel and features a hardwired facility with a glanded incomer, which allows the solution to be connected directly to a standby generator. We offer a range of interchangeable single and three phase socket outlets which can be fitted to the temporary site distribution board based on the requirements of your project.

    Options

    • 230V – 400V single and three phase – 50hz
    • Interchangeable socket outlets from 16A – 63A
    • both IP44 or IP67 available
    • Glanded hardwire facility
    • MCB’S have C – type trip curves, all RCD’s and RCBO’s are type A
    • IP rating: IP54 up to IP65
    • Stainless steel 1.4003 or Zintec 2.00 mm enclosures available
    • Door interlocking pad lockable handle
    • Secondary door for access to main supply for safe isolation
    • Galvanised crash frame, forklift pockets and certifi d lifting points
    • Optional switchable and adjustable earth leakage
    • External earth stud on crash frame and enclosure
    • RAL colours available upon request
  • SD125-e

    125A site distribution board designed to make connection from the temporary generator to on-site equipment such as…

    125A site distribution board designed to make connection from the temporary generator to on-site equipment such as tools, lighting, heaters, plant machinery and cabins. Our site distribution boards are kept on standby at our three strategically placed locations across the UK, so we can deliver them to you quickly. 125A site distribution boards can be custom built to suit the needs of your project. Available to purchase or hire.

    Product details
    The site distribution board is housed in a 1.4003 stainless steel enclosure, designed to IP55 with a textured powder coat finish to RAL 7021 – dark grey. The site distribution board features two doors – the main door, which allows the user access to the final distribution circuits and has a padlock facility which is designed as an additional safety feature. The second door allows the user access to the mains switch only.
    The 125A site distribution board has a bottom entry 3mm aluminium gland plate, top mounted rain cover, and pre-punched sides to allow for socket mounting (16A, 32A & 63A – IP44 & IP67). The enclosure is mounted within a galvanized box section floor stand which can be easily relocated across site.
    The equipment has an incoming 4 pole thermal magnetic strip and optional adjustable/switchable incoming earth leakage can be added if required. The 4 pole busbar distribution system allows an easy connection for 2 pole and 4 pole outgoing devices such as RCD’s and RCBO’s. The internal earth bar is bonded to external studs on enclosure and frame. The equipment has an incoming 125A IP67 flying lead to allow for connection to a temporary generator.

    Options
    • 230V – 400V single and three phase – 50hz
    • Interchangeable socket outlets from 16A – 63A
    • both IP44 or IP67 available
    • Glanded hardwire facility
    • MCB’S have C – type trip curves, all RCD’s and RCBO’s are type A
    • IP rating: IP54 up to IP65
    • Stainless steel 1.4003 or Zintec 2.00 mm enclosures available
    • Door interlocking pad lockable handle
    • Secondary door for access to main supply for safe isolation
    • Galvanised crash frame, forklift pockets and certifi d lifting points
    • Optional switchable and adjustable earth leakage
    • External earth stud on crash frame and enclosure
    • RAL colours available upon request

Not found what you are looking for? Fill in the form below and one of our IDE Advisors will contact you, to go through your requirement in more detail.

  • One of our friendly team members will get back to you

Your quote list
Your quote list is empty.