Contingency Power

Understanding your contingency power connection needs

IDE has over 25 years' experience in designing power distribution solutions. With direct access to our skilled engineers, we can help you understand and specify solutions for generator connection.

Highest reliability components and switchgear

You need to know that, when it's needed, the contingency power can be relied upon. We use the highest quality switchgear in all our products, giving you confidence.

Site survey and installation

We provide site surveys to advise on positioning and power connection and switching requirements, and can also install if required.

Long term partnership

We innovate to suit the needs of our customers and can create bespoke products and services to match your capital and operational budgets.

High current Inline Protection units designed to support a range of generator applications such as load banking, testing and maintenance.  Inline Protection (IP) units provide an added level of safety where needed. Offering over load and residual current detection to protect personnel and equipment. All of our inline protection units are available to purchase or hire.

  • IP630S

    Three-phase inline supply/equipment protection and splitter unit for use on any temporary electrical installation.…

    IP630S

    Three-phase inline supply/equipment protection and splitter unit for use on any temporary electrical installation. Equipment housed in a polyethylene enclosure, with recessed Socket and Switchgear panels for mechanical protection. Enclosure incorporates integrated lifting handles and rails for ease of handling and stacking. External brass earth stud.

    10mm thick 300-Grade High Density Polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, impact strength of 10 kJ/m², service temperature from -50 to +80°C, with greater than 1014Ω surface resistance. IP54 Rated.

    Specification:

    • Incomer: 630A 400V 3P+N+E Powerlock drain connectors.
    • Outgoing: 2 x 630A 400V Powerlock source connectors.
    • Protection: 630A 4 pole MCCB
    • Dimensions: H450 x W550 x D495 (mm)
    • Weight: – 40kgs

    All temporary power distribution boxes are manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty.

  • IP630

    630A Three-phase inline supply/equipment protection unit for use on any temporary electrical installation. Equipment…

    IP630 distribution unit

    630A Three-phase inline supply/equipment protection unit for use on any temporary electrical installation. Equipment housed in a polyethylene enclosure, with recessed Socket and Switchgear panels for mechanical protection. Enclosure incorporates integrated lifting handles and rails for ease of handling and stacking. External brass earth stud.

    Enclosure manufactured from 10mm thick 300-Grade High Density Polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, impact strength of 10 kJ/m², service temperature from -50 to +80°C, with greater than 1014Ω surface resistance. IP54 Rated.

    Specification:

    • Incomer: 630A 400V 3P+N+E Powerlock drain connectors.
    • Outgoing: 630A 400V Powerlock source connectors.
    • Protection: 630A 4P MCCB
    • Dimensions: H450 x W550 x D495 (mm)
    • Weight: – 40kgs

    All temporary power distribution boxes are manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty.

  • IP400

    400A Three-phase inline supply/equipment protection unit for use on any temporary electrical installation. Equipment…

    IP400 distribution unit

    400A Three-phase inline supply/equipment protection unit for use on any temporary electrical installation. Equipment housed in a polyethylene enclosure, with recessed Socket and Switchgear panels for mechanical protection. Enclosure incorporates integrated lifting handles and rails for ease of handling and stacking. External brass earth stud.

    Enclosure manufactured from 10mm thick 300-Grade High Density Polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, impact strength of 10 kJ/m², service temperature from -50 to +80°C, with greater than 1014Ω surface resistance. IP54 Rated.

    Specification:

    • Incomer: 400A 400V 3P+N+E Powerlock drain connectors.
    • Outgoing: 400A 400V Powerlock source connectors.
    • Protection: 400A 4P MCCB
    • Dimensions H450 x W550 x D495 (mm)
    • Weight – 27kgs

    All temporary power distribution boxes are manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty.

  • IP63

    63A three-phase personnel protection unit for use on any temporary electrical installation.  Equipment housed in a…

    IP63 Inline Protection Unit

    63A three-phase personnel protection unit for use on any temporary electrical installation.  Equipment housed in a solid cast rubber spider enclosure, with integrated transparent Mod window protected Switchgear, fixed carry handle and rising feet for ease of stacking. Inlet on a rated flying H07RN-F lead to aid connection to generator or distribution board.

    Self extinguishing, fully insulated, hard butyl rubber enclosure. Resistant to atmospherics and chemical agents. IP55 Rated.

    • Incomer: 63A 400V IP67 Plug
    • Outgoing: 63A 400V 5 Pin IP67 socket.
    • Protection: 63A 4 pole 30mA RCD
    • Dimensions H350 x W450 x D400 (mm)
    • Weight – 12kgs

    All temporary power distribution boxes are manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty.

  • IP1600

    1600A 4 Pole ACB LSI supplying a common rated HDHC copper bus-bar system and load connection pads. All equipment housed…

    1600A Inline Protection Unit

    1600A 4 Pole ACB LSI supplying a common rated HDHC copper bus-bar system and load connection pads. All equipment housed in a steel enclosure with internal and external copper earth bar. Complete unit mounted within a galvanised steel crash frame with forklift pockets and lifting eyes. Fitted with Emergency stop shunt operated c/w Indication lamps.

    Enclosure

    Black (RAL9005) textured powder coated stainless steel 1.4003. Separate incoming and outgoing with internal protection shrouds and external panel key lock doors. Bottom aluminium gland plates. Assembled to IP55.

    Specification

    • Input: 3P + N + E (Hardwire) . Protection: 1600A 4 Pole ACB
    • Outgoing: 3P + N + E (Hardwire) . Protection: N/A
    • Dimensions: H2320 x W960 x D900 (mm)
    • Weight – 1000kg

    All temporary power distribution equipment is manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification). The products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty.

    This 1600A Inline Protection Unit  is available to purchase or hire. For more information, please contact sales@idesystems.co.uk.

  • IP32

    32A Three-phase inline supply/equipment protection unit for use on any temporary electrical installation. Equipment…

    32A Inline Protection Distribution Board

    32A Three-phase inline supply/equipment protection unit for use on any temporary electrical installation. Equipment housed in a solid cast rubber spider enclosure, with integrated transparent Mod window protected switchgear, fixed carry handle and rising feet

    Equipment housed in a self extinguishing, fully insulated, hard butyl rubber enclosure which is resistant to atmospherics and chemical agents. IP55 rated.

    Specification:

    • Incomer: 32A 400V IP67 Plug
    • Outgoing: 400A 400V Powerlock source connectors.
    • Protection: 32A 400V IP67 Socket
    • Dimensions H350 x W450 x D400 (mm)
    • Weight – 10kgs

Not found what you are looking for? Fill in the form below and one of our IDE Advisors will contact you, to go through your requirement in more detail.

  • One of our friendly team members will get back to you

Your quote list
Your quote list is empty.