Temporary Power

Understanding your temporary power distribution needs

IDE has over 25 years' experience in designing power distribution solutions. With direct access to our skilled engineers, we can help you understand and specify solutions for any event.

Optimising your temporary power distribution network

IDE supplies a full range of temporary power distribution panels from 4000A generator connections to small dual 16A sockets, and all connecting cable to ensure you optimise your temporary power network. We fit the product to the application.

Quality and safety assured

Every time any of our products leave our rental depot or manufacturing base, we test operation and safety. This includes EVERY socket, EVERY breaker, EVERY cable connection to ensure the highest reliability.

Long-term partnership

We can help you plan ahead, ensuring you get the best from your temporary power distribution set-up and our expert services. We can also manage your complete distribution fleet, or provide one stop rental management.

Site Power Distribution

Our site power distribution equipment is designed to withstand the tough conditions of construction sites and is used to supply temporary power to site cabins, heaters, lighting, tools and plant equipment. We offer a range of temporary power solutions such as: site power distribution boards, cabling solutions and site transformers. All of our site power equipment is available for hire or purchase, supporting both short term and long term projects.

If you can't find the solution that you are looking for, give us a call - our team of trusted advisors are on-hand to help you find the right solution for your project.

  • AMF1600S-1

    1600A Three-phase auto mains fail (AMF) changeover panel allows automatic connection of a secondary electrical supply to…

    1600A Changover Panel

    1600A Three-phase auto mains fail (AMF) changeover panel allows automatic connection of a secondary electrical supply to a load upon failure of the primary. Mechanically and electronically interlocked 4 Pole ACB’s supplying a common rated HDHC copper busbar system and load connection pads. No volt connection for remote Generator start (N/O & N/C). Auxiliary power supply for Generator battery charging/jacket water heater. 3 Position key switch for Auto, Test and Generator run. Supply availability neon’s for visual representation of status. Incoming supply adjustable undervolt and time delay relays for setting of individual supply parameters. All equipment housed in a steel enclosure with internal and external brass earth bar. Complete unit mounted within a galvanised steel crash frame with forklift pockets and lifting eyes.

    Enclosure

    Black (RAL7035) textured powder coated Zintec steel construction with phosphate welds. Separate incoming and outgoing (with control gear) compartments with internal protection shrouds and external panel key lock doors. Aluminium gland plate. Assembled to IP55.

    Specification 

    • Input 1 (Mains): 3P + N + E (Hardwire) . Protection: 1600A 4 Pole ACB
    • Input 2 (Generator): 3P + N + E (Hardwire) . Protection: 1600A 4 Pole ACB
    • Outgoing Load: 3P + N + E (Hardwire) . Protection: N/A
    • Aux: 32A 400V 3P+N+E socket. Protection: 32A 4 Pole 30mA RCBO
    • Dimensions: H2100 x W1430 x D650 (mm)
    • Weight – 750kg

    All temporary power distribution equipment is manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification). The products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty.

  • ST103

    110kVA three phase site power transformer designed for use on any temporary electrical installation or construction…

    10kVA Site Power Transformer

    110kVA three phase site power transformer designed for use on any temporary electrical installation or construction site.

    The 10kVA three phase site transformer has four 110V 16A and two 32A 2P+E socket outlets with MCB protection. Fitted in a robust heavy duty case conforming to IP44 with two carry handles and mounted on skids. Finished in red with yellow front and back plates. Insulation class B, frequency 50/60Hz. High visibility enclosure ensures that the product is easily seen on site and can be relocated if required.

    Specification:

    • Incomer: 32A 400V 3P+N+E Plug and SY Cable Protection: 16A 3 Pole MCB
    • Outgoing: 2 x 32A 230V 1P+N+E Pnl Mnt Skt. Protection: 2 x 32A 2 Pole MCB
    • Outgoing: 4 x 16A 230V 1P+N+E Pnl Mnt Skt. Protection: 2 x 16A 2 Pole MCB (shared)
    • Dimensions H685 x W505x D500 (mm)
    • Weight 75kg

     

    All temporary power distribution equipment is manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification). The products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty.

    This 10kVA Site Power Transformer  is available to purchase or hire. For more information, please contact sales@idesystems.co.uk.

  • AMF400S-1

    Three-phase auto mains fail (AMF) unit allows automatic connection of a secondary electrical supply to a load upon…

    400A Chnagover Panel

    Three-phase auto mains fail (AMF) unit allows automatic connection of a secondary electrical supply to a load upon failure of the primary. Mechanically and electronically interlocked 4 Pole AC1 rated contactors supplying a common rated HDHC copper busbar system and load connection pads. No volt connection for remote Generator start (N/O & N/C). Auxiliary power supply for Generator battery charging/jacket water heater. 3 Position key switch for Auto, Test and Generator run. Supply availability neon’s for visual representation of status. Incoming supply adjustable undervolt and time delay relays for setting of individual supply parameters. All equipment housed in a steel enclosure with internal and external brass earth bar. Complete unit mounted within a galvanised steel crash frame with forklift pockets.

    Enclosure

    Grey (RAL7035) textured powder coated Zintec steel construction with phosphate welds. Separate incoming and outgoing (with control gear) compartments with internal protection shrouds and external panel key lock doors. Aluminium gland plate. Assembled to IP55.

    • Input 1 (Mains): 3P + N + E (Hardwire) . Protection: 400A 4 Pole Contactor
    • Input 2 (Generator): 3P + N + E (Hardwire) . Protection: 400A 4 Pole Contactor
    • Outgoing Load: 3P + N + E (Hardwire) . Protection: N/A
    • Aux: 32A 230V 1P+N+E socket. Protection: 32A 2 Pole 30mA RCBO
    • Dimensions: H1700 x W985 x D530 (mm)
    • Weight – 206kg

    All temporary power distribution equipment is manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification). The products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty.

    This 400A Changeover Panel  is available to purchase or hire. For more information, please contact sales@idesystems.co.uk.

  • SD200

    200A temporary site distribution board designed for use on construction sites and temporary electrical installations.…

    200A Site Distribution Board

    200A temporary site distribution board designed for use on construction sites and temporary electrical installations.

    The 200A temporary site distribution board is manufactured from stainless steel and features a hardwired facility with a glanded incomer, which allows the solution to be connected directly to a standby generator. We offer a range of interchangeable single and three phase socket outlets which can be fitted to the temporary site distribution board based on the requirements of your project.

    Options

    • 230V – 400V single and three phase – 50hz
    • Interchangeable socket outlets from 16A – 63A
    • both IP44 or IP67 available
    • Glanded hardwire facility
    • MCB’S have C – type trip curves, all RCD’s and RCBO’s are type A
    • IP rating: IP54 up to IP65
    • Stainless steel 1.4003 or Zintec 2.00 mm enclosures available
    • Door interlocking pad lockable handle
    • Secondary door for access to main supply for safe isolation
    • Galvanised crash frame, forklift pockets and certifi d lifting points
    • Optional switchable and adjustable earth leakage
    • External earth stud on crash frame and enclosure
    • RAL colours available upon request

    The 200A Site Distribution Board is available to purchase or hire. For more information please contact sales@idesystems.co.uk

  • 1
  • 2

Not found what you are looking for? Fill in the form below and one of our IDE Advisors will contact you, to go through your requirement in more detail.

  • One of our friendly team members will get back to you

Your quote list
Your quote list is empty.