MD2-e

A 63A three-phase (400V) power distribution box designed to distribute temporary power from one area to another. The 63A plug and play temporary power distribution board is easy to relocate across site and blends in with the surrounding environment. All switchgear and Tri-rated wiring is housed within a purpose built high density polyethylene enclosure (HDPE) , with recessed socket and switchgear panels for mechanical protection. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The enclosure incorporates integrated carry handles, common stacking rails, external brass earth stud and all necessary electrical hazard warning identification. The enclosure is fabricated from black 10mm thick 300-grade high density polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, service temperature from -50 to +80°C with greater than 1014 surface resistance. IK09 Rated.

Technical Information

Specification:

  • Incomer: 63A 400V 3P+N+E IP67 Appliance Inlet. Protection: 63A 4 Pole C-Type MCB
  • Outgoing: 6 x 32A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 6 x 32A 2 Pole 30mA RCBO
  • Outgoing: 12 x 16A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 12 x 16A 2 Pole 30mA RCBO
  • Outgoing: 63A 400V 3P+N+E IP67 Pnl Mnt Skt (through). Protection: no
  • Dimensions: H610 x W525 x D470 (mm)
  • Weight: 32kg

All temporary power distribution equipment is manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification). The products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty. All IDE temporary power distribution boxes are built with Mennekes sockets and ABB switchgear as standard.

Downloads

Need advice?

Speak to one of the team on: 01543 574 111 or fill in the form below and a member of the team will get back to you.

Your quote list
Your quote list is empty.