Temporary Power

Understanding your temporary power distribution needs

IDE has over 25 years' experience in designing power distribution solutions. With direct access to our skilled engineers, we can help you understand and specify solutions for any event.

Optimising your temporary power distribution network

IDE supplies a full range of temporary power distribution panels from 4000A generator connections to small dual 16A sockets, and all connecting cable to ensure you optimise your temporary power network. We fit the product to the application.

Quality and safety assured

Every time any of our products leave our rental depot or manufacturing base, we test operation and safety. This includes EVERY socket, EVERY breaker, EVERY cable connection to ensure the highest reliability.

Long-term partnership

We can help you plan ahead, ensuring you get the best from your temporary power distribution set-up and our expert services. We can also manage your complete distribution fleet, or provide one stop rental management.

Erica

Erica is an on site power management tool providing you with usage data so power can be managed effectively. With easily analysed power data, you will have the ability to optimise your power solution.

Innovation & Solutions

When it comes to meeting and managing your temporary power distribution needs, IDE can help you with every aspect of your operation’s requirements, from selecting and delivering the right products for your project, to helping you plan ahead

Design & Build

Every IDE product is made with care by engineering experts. Have a unique requirement? Just tell us what you need. IDE has an international reputation for its extensive core range of high quality power distribution products, designed and hand-built in Britain.

When it comes to meeting and managing your temporary power distribution needs, IDE can help you with every aspect of your operation’s requirements, from selecting and delivering the right products for your project, to helping you plan ahead.

  • IDE Onsite + EV Charger

    The IDEV Onsite + AC charging unit has been designed to charge electric vehicles from a temporary power source. Housed…

    The IDEV Onsite + AC charging unit has been designed to charge electric vehicles from a temporary power source. Housed in a steel enclosure suitable for outdoors, this EV charger has 2 x type 2 charge sockets, for a selection of models to suit all input requirements. Portable charging unit for ease of use.

    Up to 3 charge units, 6 charging points can be connected in line and powered from a single 63A 3 phase supply, or 6 modules with 12 charging points in “low power” mode.

    Specification

    Input: Optional configurations for 32A 3 Phase, 63A Single Phase, 63A 3 Phase and feedthrough 63A 3 Phase.

    Output: 2 x Type 2 Charging socket, 3 phase capable, locking pin for cable security. PEN and DC 6mA protection.

    ON/OFF: Key switch to enable charging, three settings ‘OFF’, 16A or 32A.

    Phase Selector: Phase selector switch to balance phases during set up. Three phase only.

    Dimensions: H600 x W350 x D180 (mm)

  • IDE Onsite EV Charger

    IDEV Onsite is a robust and easily mountable temporary EV charging point for the challenging construction and industrial…

    IDEV Onsite is a robust and easily mountable temporary EV charging point for the challenging construction and industrial environment.

    Robust design with easy on site mounting with clamp plate. With charging rates up to 32A, single or three phase (7.4kWh or 22kWh), vehicles can be conveniently and quickly charged whilst onsite, whether it’s a quick top-up for visiting personnel or full vehicle charge.

    Compatible with all European vehicles, the Type 2 connection is the most popular, covering BMW, Tesla, VW, Renault, Mercedes, Porsche, Hyundai and many others.

    Specification

    Input: 32A 400V 5 or 3 Pin IP67 Inlet or Hardwire with adaptable mounting plate. No protection – requires connecting to a 32A RCBO outlet.

    Output: Type 2 Charging socket, 3 phase capable, locking pin for cable security. PEN and DC 6mA protection.

    ON/OFF: Key switch to enable charging, three settings ‘OFF’, 16A or 32A

    Mounting: 4 M5 studs and clamp plate. Clamp plate used for mounting to IDE SD range and on-site fencing / boarding etc.

    Adapters: 32A 1 phase socket, 32A 3 phase socket, blanking plate for rear cable entry, gland plate for bottom entry hard wire

    Dimensions: H160 x L245 x D165 (mm)

  • AMF Compact Unit

    Introducing the latest in product innovation. Key Features: >  Fully automatic plug in transfer switch >  IEC…

    Introducing the latest in product innovation.

    Key Features:

    >  Fully automatic plug in transfer switch

    >  IEC 60947-6-1 tested and fulfils the requirements of Part 6-1.

    >  Lockable manual transition mode

    >  Large legible lamp mode indicators

    > Reliable motorized switch

    Specifications:

    > Input 1 (Mains): 125A 400V 5 pin IP67 inlet.
    > Switching Method: Motorized open transition
    > Input 2 (Generator): 125A 400V 5 pin IP67 inlet.
    > Switching method: 125A 4 pole contactor
    > Outgoing (Load) : 125A 400V 5 pin IP67 socket. Protection: N/A
    > Aux: 16A 230V 3 Pin outlet fed from 16A RCBO 30mA

  • MD32 AMF COMBI UNIT

    Introducing the latest in product innovation. Key Features: >  Fully automatic plug in transfer switch >  IEC…

    Introducing the latest in product innovation.

    Key Features:

    >  Fully automatic plug in transfer switch

    >  IEC 60947-6-1 tested and fulfils the requirements of Part 6-1.

    >  2 In 1 Compact design

    >  Lockable manual transition mode

    >  Large legible lamp mode indicators

    > Reliable motorized switch

    Specifications

    > Input 1 (Mains/Duty): 125A 400V 5 pin IP67 inlet.Main Protection: 125A 4 pole MCCB

    > 1 X 63A 230V 3 Pole IP67 Panel-Socket 1 X 32A 400V 5 Pole IP44 Panel-Socket 1 X 63A 400V 5 Pole IP67 Panel-Socket 11 X 32A 230V 3 Pole Panel-Sockets, 7 X 16A 230V 3 Pole Panel-Sockets

    > Outgoing Protection: 63A 4 pole MCCB, 63A 2 Pole Type C MCB, C32 4 Pole RCBO, C32 2 Pole RCBO, C16 2 Pole RCBO (RCBOs 30mA)

    > Switching method: Motorized open transition > Aux: 16A 230V 3 Pin IP44 socket.

    > Protection: 16A 2 Pole 30mA RCBO

  • MD2000

    A Partially Type Tested Three-phase mains distribution unit for use on any temporary electrical installation. Equipment…

    A Partially Type Tested Three-phase mains distribution unit for use on any temporary electrical installation. Equipment housed in a steel enclosure with rated common HDHC copper busbar system.

    Entire panel is fixed within a load tested 3mm galvanised mild steel crash frame with crane lifting points and integral 200mm x 115mm fork lift pockets. The frame allows bottom entry of 240mm² HO7 cables and exit of 240mm² HO7 cables, through a brush gland plate, allowing a minimum bend radius of 400mm. Internal and external copper earth bars complete with brass studs with panel clearance to allow lug on within each incoming and outgoing section. Each outgoing section is fitted with its own Multi-Function power monitor, earth leakage protection, and compartment anti-condensation heaters.

    Enclosure
    Manufactured from rigid 3mm Zintec steel with phosphate primed welds, texture powder coated to RAL 9005 (Black). Front access doors manufactured from rigid 2mm Zintec steel, fitted with door locks and door stays (Lock out at 135°). Enclosure achieves IP65 rating. Other features include integral 2mm powder coated mild steel shrouds for additional safety, compliance with Form 4 Type 3 separation, and aluminium gland plates.

    Specification:
    Input: 2000A 3P+N Copper Stubs 2000A 4 Pole (50kA) ACB
    Outgoing: 6 No. 400A 3P+N Copper Stubs
    Outgoing: 6 No. 400A 4 Pole (50kA) MCCB’s c/w programmable & switchable earth leakage. (All MCB’s have C-Type trip curves. All RCD’s and RCBO’s are Type A)
    Dimensions: H 2100mm x W 2220mm x D 850mm
    Weight: 920kgs

  • IP4000

    4000A 4 Pole ACB LSI supplying a common rated HDHC copper bus-bar system and load connection pads. All equipment housed…

    4000A 4 Pole ACB LSI supplying a common rated HDHC copper bus-bar system and load connection pads. All equipment housed in a steel enclosure with internal and external copper earth bar. Complete unit mounted within a galvanised steel crash frame with forklift pockets and lifting eyes.

    Enclosure
    Black (RAL9005) textured powder coated stainless steel 1.4003. Separate incoming and outgoing with internal protection shrouds and external panel key lock doors. Bottom aluminium gland plates. Assembled to IP55.

    Input: 3P + N + E Hardwire 4000a 4 pole ACB
    Outgoing: 3P + N + E Hardwire
    Dimensions: H 2320mm x W 1200mm x D 1300mm
    Weight: 700kgs aprox

  • Mobility Access Cable Ramp

    IDE’s 5 channel cable ramps are manufactured from UV stabilised and halogen free polyurethane. 100% Non-Conductive…

    IDE’s 5 channel cable ramps are manufactured from UV stabilised and halogen free polyurethane. 100% Non-Conductive cable ramps. Highly Visible Red (RAL3020) and Black colour combination with unique tread pattern providing increase grip on side ramps. Designed for mobility access.

    Dimensions: H35mmx W1050mm x D920mm

    Maximum load: 4763kg

  • 150mm Cable (Lugg Ends)

    150mm single-core HO7RN-F  cable  terminated with lugged ends (M12 standard) to make connections to standby or…

    150mm cable

    150mm single-core HO7RN-F  cable  terminated with lugged ends (M12 standard) to make connections to standby or permanent generators.

    Available with powerlock source/drain terminations if required.

    Sizes available:

    > 5 Metres

    > 10 Metres

    > 15 Metres

    > 20 Metres

    > 25 Metres

    > 50 Metres

    All of our 240mm HO7RN-F cable solutions are available for purchase or hire and can be turned around quickly to support your project.

    Approx weight per metre (5 wire set – L1, L2, L3, Earth and Neutral): 15kg

  • SD63

    Three-phase mains distribution unit for use on any temporary electrical installation or construction site. Equipment…

    Three-phase mains distribution unit for use on any temporary electrical installation or construction site. Equipment housed in a 1.4003 (3CR12) stainless steel enclosure designed to IP55 with textured powder coat finish to RAL 7021 – dark grey. (Other colours are available by request).
    Main door to gain access to final distribution circuits, secondary door for access to main switch only. Main door provided with a pad lock facility.
    Bottom entry 3mm aluminum gland plate, top mounted rain cover, and pre-punched sides for outgoing socket mounting from 16A to 63A, IP44 and IP67.
    Enclosure mounted within a galvanized box section crash frame complete with fork lift pockets.

    Incomer: 63A 3 Phase in

    Outgoing: 1 x 63a/1

    Outgoing: 8 x 32a/1

    Outgoing: 1 x 16a/1

Not found what you are looking for? Fill in the form below and one of our IDE Advisors will contact you, to go through your requirement in more detail.

  • One of our friendly team members will get back to you

Erica

Erica is an on site power management tool providing you with usage data so power can be managed effectively. With easily analysed power data, you will have the ability to optimise your power solution.

Innovation & Solutions

When it comes to meeting and managing your temporary power distribution needs, IDE can help you with every aspect of your operation’s requirements, from selecting and delivering the right products for your project, to helping you plan ahead

Design & Build

Every IDE product is made with care by engineering experts. Have a unique requirement? Just tell us what you need. IDE has an international reputation for its extensive core range of high quality power distribution products, designed and hand-built in Britain.

Your quote list
Your quote list is empty.