Temporary Power

Understanding your temporary power distribution needs

IDE has over 25 years' experience in designing power distribution solutions. With direct access to our skilled engineers, we can help you understand and specify solutions for any event.

Optimising your temporary power distribution network

IDE supplies a full range of temporary power distribution panels from 4000A generator connections to small dual 16A sockets, and all connecting cable to ensure you optimise your temporary power network. We fit the product to the application.

Quality and safety assured

Every time any of our products leave our rental depot or manufacturing base, we test operation and safety. This includes EVERY socket, EVERY breaker, EVERY cable connection to ensure the highest reliability.

Long-term partnership

We can help you plan ahead, ensuring you get the best from your temporary power distribution set-up and our expert services. We can also manage your complete distribution fleet, or provide one stop rental management.

Erica

Erica is an on site power management tool providing you with usage data so power can be managed effectively. With easily analysed power data, you will have the ability to optimise your power solution.

Innovation & Solutions

When it comes to meeting and managing your temporary power distribution needs, IDE can help you with every aspect of your operation’s requirements, from selecting and delivering the right products for your project, to helping you plan ahead

Design & Build

Every IDE product is made with care by engineering experts. Have a unique requirement? Just tell us what you need. IDE has an international reputation for its extensive core range of high quality power distribution products, designed and hand-built in Britain.

When it comes to meeting and managing your temporary power distribution needs, IDE can help you with every aspect of your operation’s requirements, from selecting and delivering the right products for your project, to helping you plan ahead.

  • SD200

    200A temporary site distribution board designed for use on construction sites and temporary electrical installations.…

    200A Site Distribution Board

    200A temporary site distribution board designed for use on construction sites and temporary electrical installations.

    The 200A temporary site distribution board is manufactured from stainless steel and features a hardwired facility with a glanded incomer, which allows the solution to be connected directly to a standby generator. We offer a range of interchangeable single and three phase socket outlets which can be fitted to the temporary site distribution board based on the requirements of your project.

    Options

    • 230V – 400V single and three phase – 50hz
    • Interchangeable socket outlets from 16A – 63A
    • both IP44 or IP67 available
    • Glanded hardwire facility
    • MCB’S have C – type trip curves, all RCD’s and RCBO’s are type A
    • IP rating: IP54 up to IP65
    • Stainless steel 1.4003 or Zintec 2.00 mm enclosures available
    • Door interlocking pad lockable handle
    • Secondary door for access to main supply for safe isolation
    • Galvanised crash frame, forklift pockets and certifi d lifting points
    • Optional switchable and adjustable earth leakage
    • External earth stud on crash frame and enclosure
    • RAL colours available upon request

    The 200A Site Distribution Board is available to purchase or hire. For more information please contact sales@idesystems.co.uk

  • 240mm Cable (Powerlock)

    240mm single-core HO7RN-F  cable  terminated with powerlock ends (source and drain) or lugged ends to make connections…

    240mm Cable

    240mm single-core HO7RN-F  cable  terminated with powerlock ends (source and drain) or lugged ends to make connections to standby or permanent generators.

    Sizes available:

    > 5 Metres

    > 10 Metres

    > 15 Metres

    > 20 Metres

    > 25 Metres

    > 50 Metres

    All of our 240mm cable solutions are available for purchase or hire and can be turned around quickly to support your project.

    Approx weight per metre (5 wire set – L1, L2, L3, Earth and Neutral): 15kg

     

  • 16A Single Phase Cable

    16A single phase cable is designed to connect the temporary power network from the generator directly to the end user.…

    16A Single Phase Cable

    16A single phase cable is designed to connect the temporary power network from the generator directly to the end user.

    Sizes available:

    > 5 Metres

    > 10 Metres

    > 15 Metres

    > 20 Metres

    > 25 Metres

    > 50 Metres

    The 16A single phase (230V) extension lead is fitted with a 16A 3 pin IP44 Mennekes plug and coupler at each end.

    The cable used is 2.5mm 3core H07RN-F Double insulated, Ethylene Propylene Rubber, flexible cable designed to withstand; the weather, oils/greases, mechanical and thermal stresses. Conforms to BS EN 7919.

    Approximate weight per metre – 0.215kg

    All 16A single phase cable is available to purchase or hire and can be made up in lengths ranging from 1-100M.

    For more information on our 16A single phase cable please contact sales@idesystems.co.uk.

  • VMD1

    A 32A three-phase (400V) high visibility power distribution board designed to distribute temporary power from one area…

    32A 400V Distribution Board

    A 32A three-phase (400V) high visibility power distribution board designed to distribute temporary power from one area to another. All switchgear and Tri-rated wiring is housed within a purpose built Orange plastic enclosure for high viability. transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The enclosure incorporates integrated carry handles, and all necessary electrical hazard warning identification.

    Specification:

    • Incomer: 32A 400V 3P+N+E IP44 Appliance Inlet. Protection: N/A
    • Outgoing: 6 x 32A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 6 x 32A 2 Pole 30mA RCBO
    • Dimensions H260 x W250 x D260 (mm)
    • Weight 4kg –

    All temporary power distribution equipment is manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification). The products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty.

    For more information on our high visibility distribution board please contact sales@idesystems.co.uk.

  • AMF 400 Event

    A 400A three-phase (400V) Automatic Mains Failure (AMF) changeover panel is designed to divert power from your main…

    400A Event Changeover Panel

    A 400A three-phase (400V) Automatic Mains Failure (AMF) changeover panel is designed to divert power from your main generator to your standby generator in the event of a power failure. Mechanically and electronically interlocked AC1 rated contactors. No volt connection for remote Generator start. Auxiliary power supply for Generator battery charging or jacket water heater. 3 Position key switch for Auto, Generator run and Inhibit mains restore. Supply availability neon’s for visual representation of status. Incoming supply adjustable undervolt and time delay relays for setting of individual supply parameters. All Equipment housed in a polyethylene enclosure, with recessed Socket and Switchgear panels for mechanical protection. External brass earth studs. Complete unit mounted within a stainless steel crash frame with forklift pockets.

    10mm thick 300-Grade High Density Polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, impact strength of 10 kJ/m², service temperature from -50 to +80°C, with greater than 1014Ω surface resistance. IP55 Rated.

    Specification:

    • Incomer: 400A 400V 3P+N+E IP67 Appliance Inlet. (Mains and Generator).
    • Outgoing: 400A 400V Powerlocks (inc 16A 1P+N+E Battery Charger Socket)
    • Dimensions H942 x W612 x D495 (mm)
    • Weight – 88kgs

    All temporary power distribution equipment is manufactured by IDE in the UK and tested to BS 7671 (12 Months certification) and the products used within our distribution systems conform to EN 60309, EN 60947, EN 60529 and have a 12 month warranty.

    This 400A event changeover panel is available to purchase or hire. For more information, please contact sales@idesystems.co.uk.

  • IP32

    32A Three-phase inline supply/equipment protection unit for use on any temporary electrical installation. Equipment…

    32A Inline Protection Distribution Board

    32A Three-phase inline supply/equipment protection unit for use on any temporary electrical installation. Equipment housed in a solid cast rubber spider enclosure, with integrated transparent Mod window protected switchgear, fixed carry handle and rising feet

    Equipment housed in a self extinguishing, fully insulated, hard butyl rubber enclosure which is resistant to atmospherics and chemical agents. IP55 rated.

    Specification:

    • Incomer: 32A 400V IP67 Plug
    • Outgoing: 400A 400V Powerlock source connectors.
    • Protection: 32A 400V IP67 Socket
    • Dimensions H350 x W450 x D400 (mm)
    • Weight – 10kgs
  • MD402

    A 400A three-phase (400V) powerlock distribution board designed to distribute temporary power from one area to another.…

    400A Powerlock Distribution Board

    A 400A three-phase (400V) powerlock distribution board designed to distribute temporary power from one area to another. The 400A plug and play distribution board is easy to relocate across site and blends in well with the surrounding environment. User has the option to hardwire into the standby generator using powerlock or lugged terminations. All switchgear and Tri-rated wiring is housed within a purpose built polyethylene enclosure, with recessed socket and switchgear panels for mechanical protection. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The inlet supply has a phase rotation monitor and each outlet has a red ‘Power On’ neon light. External brass earth stud. Complete unit mounted within a stainless steel crash frame with forklift pockets.

    The enclosure is fabricated from black 10mm thick 300-grade high density polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, service temperature from -50 to +80°C with greater than 1014 surface resistance. IK09 Rated.

    Specification:

    • Incomer: 400A 400V 3P+N+E Powerlock Drain Connectors. Protection: 400A 4 Pole MCCB
    • Outgoing: 400A 400V 3P+N+E Powerlock Source Connectors(through). Protection: N/A
    • Outgoing: 3 x 125A 400V 3P+N+E IP67 Pnl Mnt Skt. Protection: 3 x 125A 4 Pole MCCB c/w Adjustable/Switchable Earth Leakage
    • Outgoing: 3 x 63A 400V 3P+N+E IP67 Pnl Mnt Skt. Protection: 3 x 63A 4 Pole C-Type MCB & 100mA RCD
    • Outgoing: 3 x 63A 230V 1P+N+E IP67 Pnl Mnt Skt. Protection: 3 x 63A 2 Pole C-Type MCB & 100mA RCD
    • Outgoing: 3 x 32A 400V 3P+N+E IP67 Pnl Mnt Skt. Protection: 3 x 32A 4 Pole 30mA C-Type RCBO
    • Outgoing: 2 x 16A 230V 1P+N+E IP67 Pnl Mnt Skt. Protection: 2 x 16A 2 Pole 30mA C-Type RCBO
    • Dimensions:H1392 x W612 x D495
    • Weight 110kgs

    All temporary power distribution equipment is manufactured by IDE  in the UK and tested to BS 7671 (12 Months Certification). The products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty.

    This 400A temporary power distribution product is available to purchase or hire. For more information, please contact sales@idesystems.co.uk.

  • MD32

    A 125A three-phase (400V) power distro box designed to distribute temporary power from one area to another. The 125A…

    125A Distribution Board

    A 125A three-phase (400V) power distro box designed to distribute temporary power from one area to another. The 125A distro is plug and play which means that it is easy to relocate across site and blends in well with the surrounding environment. All switchgear and Tri-rated wiring is housed within a purpose built high density polyethylene enclosure, with recessed socket and switchgear panels for mechanical protection. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The enclosure incorporates integrated carry handles, common stacking rails, external brass earth stud and all necessary electrical hazard warning identification.

    The enclosure is fabricated from black 10mm thick 300-grade high density polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, service temperature from -50 to +80°C with greater than 1014 surface resistance. IK09 Rated.

    Specification:

    • Incomer: 125A 400V 3P+N+E IP67 Appliance Inlet. Protection: 125A 4 Pole MCCB
    • Outgoing: 63A 400V 3P+N+E IP44 Pnl Mnt Skt. Protection: 63A 4 Pole C-Type MCB
    • Outgoing: 2 x 32A 400V 3P+N+E IP44 Pnl Mnt Skt. Protection: 2 x 32A 4 Pole 30mA RCBO
    • Outgoing:12 x 32A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 12 x 32A 2 Pole 30mA RCBO
    • Outgoing: 6 x 16A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 6 x 16A 2 Pole 30mA RCBO
    • Dimensions: H600 x W550 x D495 (mm)
    • Weight – 41kg

    All temporary power distribution equipment is manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification). The products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty. All IDE temporary power distros are built with Mennekes sockets and ABB switchgear as standard.

Not found what you are looking for? Fill in the form below and one of our IDE Advisors will contact you, to go through your requirement in more detail.

  • One of our friendly team members will get back to you

Erica

Erica is an on site power management tool providing you with usage data so power can be managed effectively. With easily analysed power data, you will have the ability to optimise your power solution.

Innovation & Solutions

When it comes to meeting and managing your temporary power distribution needs, IDE can help you with every aspect of your operation’s requirements, from selecting and delivering the right products for your project, to helping you plan ahead

Design & Build

Every IDE product is made with care by engineering experts. Have a unique requirement? Just tell us what you need. IDE has an international reputation for its extensive core range of high quality power distribution products, designed and hand-built in Britain.

Your quote list
Your quote list is empty.