Rental

IDE's Rental Centres provide a full range of temporary power distribution equipment for a wide range of applications, and can deliver to you anywhere in the UK and Europe. We have the logistical capability to support large planned contracts or emergencies and offer both same-day and next day delivery.

Offering a helping hand

Our strategically placed Rental Centres in the South East, Midlands and Scotland hold large inventories of stock, ensuring that wherever you are, you get access to the right equipment when you need it.

Products for every need

We stock a range of power distribution (16A-4000A) and cable (16A-400A) to suit a wide variety of applications, from events, to construction projects and power overlays. We can build bespoke for long-term hire too.

Supporting your rental requirements

Our experience in the hire industry allows us to provide specialist advice on how to effectively plan the temporary power network for your project. We can also provide skilled labour to install temporary power distribution equipment for your site.

We're on your side

It starts with a conversation. Send us your requirements and our rental team will advise on the best solution to suit your project. Both same-day and next day delivery to meet tight deadlines.

Whatever the event – Bring it on

Our event power distribution equipment is designed to cater for all event requirements – supporting generators, entertainment stages, PA systems, lighting, audio visual equipment and refreshment areas. We offer a range of solutions such as: event distribution boards (16A - 3200A), cabling solutions, cable ramps and changeover panels, which are available to purchase or hire from us. All of our event power distribution equipment can be manufactured to meet the requirements of your project.

MD16

16A Event Distribution Board

A 16A single-phase (230V) steel distribution board ideal for use on temporary electrical installations and events. All Tri-rated wiring is housed within a purpose built steel enclosure. Incoming 16A plug sits on a 2.5mm 3 core H07RN-F flying lead to allow ease of connection to a socket outlet. The toblerone shaped enclosure incorporates an integrated carry handle, power present neon and all necessary electrical hazard warning identification.

The enclosure is fabricated from 2mm phosphate welded Zintec steel with a black textured powder coat.

Specification:

  • Incomer: 16A 230V 1P+N+E IP44 Plug on 0.5m Lead Protection: No
  • Outgoing: 12 x 13A 230V 1P+N+E (Twin) Pnl Mnt Skt. Protection: N/A
  • H125 x W245 x D550 (mm)
  • 6kgs

All temporary power distribution equipment is manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification). The products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty.
This 16A power distribution product is available to purchase or hire. For more information, please contact [email protected]
 

 

MD42 Spider

32a Temporary Power Distribution Board

Description

32a Single-phase mains distribution unit for use on any temporary electrical installation.  Equipment housed in a solid cast rubber spider enclosure, with integrated transparent MOD window protected switchgear, fixed carry handle and rising feet for ease of stacking. Inlet on a rated flying H07RN-F lead to aid connection to generator or distribution board.

Specification:

  • Incomer: 32A 230V 3Pin IP44 Plug Protection: 32a 2 Pole 30mA RCBO
  • Outgoing: 4 No. 16A 230V 3Pin IP44 Sockets Protection: 4x 16a MCB
  • Dimensions: H:300 x W400 D:350mm
  • Weight: 6kg

All temporary power distribution equipment is manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification). The products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty. All IDE temporary power distribution boxes are built with Mennekes sockets and ABB switchgear as standard.
This 32A temporary power distribution box is available to purchase or hire. For more information, please contact [email protected]

MD42

32A power distribution board

A 32A single-phase (230V) rubber box distribution board designed to distribute temporary power from one area to another. The 32A plug and play distribution board is easy to relocate across site and blends in well with the surrounding environment. Comes in a self extinguishing enclosure, fully insulated and manufactured from hard butyl rubber. Resistant to atmospherics and chemical agents. IP55 Rated

 

Specification:

  • Incomer: 32A 230V IP44 1P+N+E Plug on Lead. Protection: 32A 2 Pole 30mA RCBO
  • Outgoing: 4 x 16A 230V 1P+N+E (Twin) Pnl Mnt Skt. Protection: 4 x 16A C-Type MCB
  • Dimensions: H190 x W450 x D160 (mm)
  • Weight - 4kgs

All temporary power distribution boxes are manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty. For more information, please contact [email protected]

MD25

32a Distribution Board

A 32A three-phase (400V) rubber box distribution board designed to distribute temporary power from one area to another. The 32A plug and play distribution board is easy to relocate across site and blends in well with the surrounding environment. All switchgear and Tri-rated wiring is housed within a solid cast rubber enclosure. An integrated transparent window is used to allow visual identification of the switchgear status and allow access in event of a trip. Incoming 32A supply plug sits on a 6mm 5 core 1 metre H07RN-F flying lead to allow ease of connection to a socket outlet. The enclosure incorporates a carry handle, stacking feet/raisers and all necessary electrical hazard warning identification.

The enclosure is a black, self extinguishing, fully insulated, stackable, hard butyl rubber spider, with high resistance to chemical agents, atmospherics and current leakage. IK10 rated.

Specification:

  • Incomer: 32A 400V 3P+N+E IP44 Plug on 1 metre lead
  • Outgoing: 4 x 16A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 4 x 16A 2 Pole 30mA RCBO
  • Dimensions H340 x W340 x D330
  • Weight - 13kgs

All temporary power distribution boxes are manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty.

MD18

32A Distro

A 32A three-phase (400V) rubber box distribution board designed to distribute temporary power from one area to another. The 32A plug and play distribution board is easy to relocate across site and blends in well with the surrounding environment.  All switchgear and Tri-rated wiring is housed within a solid cast rubber enclosure. An integrated transparent window is used to allow visual identification of the switchgear status and allow access in event of a trip. Incoming 32A supply plug sits on 6mm 5 core 1metre H07RN-F flying lead to allow ease of connection to a socket outlet. The enclosure incorporates a carry handle, stacking feet/raisers and all necessary electrical hazard warning identification.

The enclosure is a black, self extinguishing, fully insulated, stackable, hard butyl rubber spider, with high resistance to chemical agents, atmospherics and current leakage. IK10 rated.

Specification:

  • Incomer: 32A 400V 3P+N+E IP44 Plug on a 1m Lead. Protection: No
  • Outgoing: 2 x 16A 400V 3P+N+E IP44 Pnl Mnt Skt. Protection: 2 x 16A 4 Pole 30mA RCBO
  • Dimensions H300 x W400 x D350
  • Weight - 5kgs

All temporary power distribution boxes are manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty. For more information, please contact [email protected]

MD13

32A Power Distribution

MD13Mh-1

A 32A three-phase (400V) power distribution box designed for use within temporary electrical installations and the events industry. All switchgear and Tri-rated wiring is housed within a purpose built polyethylene enclosure, with recessed socket and switchgear panels for mechanical protection. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The enclosure incorporates integrated carry handles, common stacking rails, external brass earth stud and all necessary electrical hazard warning identification.

The enclosure is fabricated from black 10mm thick 300-grade high density polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, service temperature from -50 to +80°C with greater than 1014 surface resistance. IK09 Rated.

Specification:

  • Incomer: 32A 400V 3P+N+E IP44 Appliance Inlet. Protection: 1 x 32A 4 Pole MCB
  • Outgoing: 3 x 32A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 3 x 32A 2 Pole 30mA RCBO
  • Outgoing: 6 x 16A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 6 x 16A 2 Pole 30mA RCBO
  • Dimensions H300 x W550 x D495 (mm)
  • Weight 17kgs

All temporary power distribution boxes are manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty.

MD11

32A Distribution Board

A 32A three-phase (400V) rubber box distribution board designed to distribute temporary power from one area to another. The 32A plug and play distribution board is easy to relocate across site and blends in well with the surrounding environment. All switchgear and Tri-rated wiring is housed within a solid cast rubber enclosure. An integrated transparent window is used to allow visual identification of the switchgear status and allow access in event of a trip. Incoming 32A supply plug sits on a 6mm 5 core H07RN-F flying lead to allow ease of connection to a socket outlet. The enclosure incorporates a carry handle, stacking feet/raisers and all necessary electrical hazard warning identification.

The enclosure is a black, self extinguishing, fully insulated, stackable, hard butyl rubber spider, with high resistance to chemical agents, atmospherics and current leakage. IK10 rated. IP55 rated.

Specification:

  • Incomer: 32A 400V 3P+N+E IP44 Plug on 1m Lead. Protection:
  • Outgoing: 3 x 32A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 3 x 32A 2 Pole 30mA RCBO
  • Dimensions: H300 W400 D350
  • Weight 10kg

All temporary power distribution equipment is manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty.
This 32A power distribution product is available to purchase or hire. For more information, please contact [email protected]

MD12

32A Event Distribution Board

A 32A three-phase (400V) event power distribution box designed to distribute temporary power from one area to another. The 32A plug and play distribution board is easy to relocate across site and blends in well with the surrounding environment.  All switchgear and Tri-rated wiring is housed within an insulated thermoplastic enclosure, with recessed socket and switchgear panels for mechanical protection. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The enclosure incorporates integrated carry handles, stacking feet/raisers, external brass earth stud and all necessary electrical hazard warning identification.

The enclosure material is black 4mm LLDPE, a robust and shock resistant thermoplastic, complete with foam rubber sealing material (EPDM). IK10 rated.

Specification:

  • Incomer: 32A 400V 3P+N+E IP44 Appliance Inlet. Protection: No
  • Outgoing: 9 x 16A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 9 x 16A 2 Pole 30mA RCBO
  • Outgoing: 1 x 32A 400V 3P+N+E IP67 Pnl Mnt Skt. Protection: No
  • Dimensions H340 x W400 x D350 (mm)
  • Weight - 12kgs

All temporary power distribution equipment is manufactured by IDE  in the UK and tested to BS 7671 (12 Months Certification). The products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty.
This 32A power distribution product is available to purchase or hire. For more information, please contact [email protected]

MD41 Spider Box

Rubber box distro

A 63A 3 phase (400V) rubber box distro designed to distribute temporary power from one area to another. The 63A 3 phase rubber box distro has a plug and play design, which makes it easy to relocate across site and blends in with the surrounding environment. All switchgear and Tri-rated wiring is housed within a solid case rubber box enclosure.  Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The enclosure incorporates integrated carry handles, common stacking rails, external brass earth stud and all necessary electrical hazard warning identification.

The enclosure is black, self extinguishing, fully insulated, stackable, hard butyl, rubber spider, with high resistance to chemical agents, atmospherics and current leakage.

Specification:

  • Incomer: 63A 400V 3P+N+E IP67 Appliance Inlet. Protection: No
  • Outgoing: 3 x 63A 230V 1P+N+E IP67 Pnl Mnt Skt. Protection: 3 x 63A 2 Pole C-Type MCB
  • Dimensions H350 x W450 x D400 (mm)
  • Weight - 17kgs

All temporary power distribution boxes are manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty. All IDE products are fitted with Mennekes sockets and ABB switchgear. For more information on this product, please contact [email protected]

MD38

63 amp 3 phase distribution board

A 63 amp 3 phase distribution board designed to distribute temporary power from one area to another. The 63 amp 3 phase distribution board features a plug and play design, which makes it easy to relocate across site and blends in with the surrounding environment. All switchgear and Tri-rated wiring is housed within a purpose built high density polyethylene enclosure (HDPE), with recessed socket and switchgear panels for mechanical protection. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The enclosure incorporates integrated carry handles, common stacking rails, external brass earth stud and all necessary electrical hazard warning identification.

The enclosure is fabricated from black 10mm thick 300-grade high density polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, service temperature from -50 to +80°C with greater than 1014 surface resistance. IK09 Rated.

Specification:

  • Incomer: 63A 400V 3P+N+E IP67 Appliance Inlet. Protection: 63A 4 Pole C-Type MCCB
  • Outgoing: 63A 400V 3P+N+E IP44 Pnl Mnt Skt. Feedthrough not protected
  • Outgoing:2 x 32A 400V 3P+N+E IP44 Pnl Mnt Skt. Protection: 2 x 32A 4Pole C-Type MCB c/w Adjustable Earth Leakage
  • Outgoing:3 x 32A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 3 x 32A 2 Pole 30mA C-Type RCBO
  • Outgoing:9 x 16A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 9 x 16A 2 Pole 30mA C-Type RCBO
  • Dimensions H600 x W550 x D495 (mm)
  • Weight - 36kg

All temporary power distribution boxes are manufactured by ide Systems Ltd in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty. All IDE power distribution products use ABB Switchgear and Mennekes sockets. For more information on this product, or to contact us regarding a bespoke build, please send your enquiry to:  [email protected]

MD63

63A Event Distribution Board

63A three-phase mains distribution unit designed to distribute temporary power from one area to another. The 63A 3 phase plug and play distribution board is easy to relocate across site and blends in with the surrounding environment. Equipment housed in a polyethylene enclosure, with recessed Socket and Switchgear panels for mechanical protection.  Enclosure incorporates integrated lifting handles and rails for ease of handling and stacking. Inlet supply has phase rotation monitor and each outlet has a red ‘Power On’ neon light. External brass earth stud.

The enclosure is fabricated from black 10mm thick 300-Grade High Density Polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, impact strength of 10 kJ/m², service temperature from -50 to +80°C, with greater than 1014Ω surface resistance. IP55 Rated.

Specification:

  • Incomer: 63A 400V 3P+N+E IP67 Appliance Inlet. Protection: 63A 4 Pole MCCB
  • Outgoing: 63A 400V 3P+N+E IP44 Pnl Mnt Skt. Feedthrough not protected
  • Outgoing: 3 x 32A 400V 3P+N+E IP44 Pnl Mnt Skt. Protection: 3 x 32A 4 Pole 30mA RCBO
  • Outgoing: 6 x 32A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 6 x 32A 2 Pole 30mA RCBO
  • Outgoing: 6 x 16A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 6 x 16A 2 Pole 30mA RCBO
  • Dimensions H600 x W550 x D495 (mm)
  • Weight - 34kg

MD52

63A 3 Phase Event Distro

A 63A three-phase (400V) power distribution box designed to distribute temporary power from one area to another. The 63A 3 phase plug and play distribution board is easy to relocate across site and blends in well with the surrounding environment. All switchgear and Tri-rated wiring is housed within a purpose built polyethylene enclosure, with recessed socket and switchgear panels for mechanical protection. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The enclosure incorporates integrated carry handles, common stacking rails, external brass earth stud and all necessary electrical hazard warning identification.

The enclosure is fabricated from black 10mm thick 300-grade high density polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, service temperature from -50 to +80°C with greater than 1014 surface resistance. IK09 Rated.

Specification:

  • Incomer: 63A 400V 3P+N+E IP67 Appliance Inlet. Protection: 63A 4 Pole C-Type MCB
  • Outgoing: 32A 400V 3P+N+E IP44 Pnl Mnt Skt. Protection: 32A 4 Pole 30mA RCBO
  • Outgoing: 3 x 32A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 3 x 32A 2 Pole 30mA RCBO
  • Outgoing: 12 x 16A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 12 x 16A 2 Pole 30mA RCBO
  • Outgoing: 63A 400V 3P+N+E IP67 Pnl Mnt Skt. Protection: N/A
  • Dimensions H600 x W550 x D495 (mm)
  • Weight - 33kg

All temporary power distribution boxes are manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty. For more information, please contact [email protected]

MD50

63A 3 Phase Distro

A 63A three-phase (400V) power distribution box designed to distribute temporary power from one area to another. The 63A 3 phase plug and play distribution board is easy to relocate across site and blends in well with the surrounding environment.All switchgear and Tri-rated wiring is housed within a purpose built polyethylene enclosure, with recessed socket and switchgear panels for mechanical protection. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The enclosure incorporates integrated carry handles, common stacking rails, external brass earth stud and all necessary electrical hazard warning identification.

The enclosure is fabricated from black 10mm thick 300-grade high density polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, service temperature from -50 to +80°C with greater than 1014 surface resistance. IK09 Rated.

Specification:

  • Incomer: 63A 400V 3P+N+E IP67 Appliance Inlet. Protection: 63A 4 Pole C-Type MCB
  • Outgoing: 3 x 32A 400V 3P+N+E IP44 Pnl Mnt Skt. Protection: 3 x 32A 4 Pole 30mA RCBO
  • Outgoing: 3 x 16A 400V 3P+N+E IP44 Pnl Mnt Skt. Protection: 3 x 16A 4 Pole 30mA RCBO
  • Dimensions H450 x W550 x D495 (mm)
  • Weight - 33kgs

All temporary power distribution boxes are manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty. For more information, please contact [email protected]

MD41

63A Distribution Board

A 63A three-phase (400V) power distribution box designed to distribute temporary power from one area to another. The 63A plug and play event distribution board is easy to relocate across site and blends in with the surrounding environment. All switchgear and Tri-rated wiring is housed within a purpose built polyethylene enclosure, with recessed socket and switchgear panels for mechanical protection. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The enclosure incorporates integrated carry handles, common stacking rails, external brass earth stud and all necessary electrical hazard warning identification.

The enclosure is fabricated from black 10mm thick 300-grade high density polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, service temperature from -50 to +80°C with greater than 1014 surface resistance. IK09 Rated.

Specification:

  • Incomer: 63A 400V 3P+N+E IP67 Appliance Inlet. Protection: 63A 4 Pole MCB
  • Outgoing: 3 x 63A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 3 x 63A 2 Pole C-Type MCB
  • Dimensions H300 x W550 x D495 (mm)
  • Weight - 17kgs

All temporary power distribution boxes are manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty. For more information on this product, please contact [email protected]

MD40

63A Distro

A 63A three-phase (400V) power distribution box designed for use within temporary electrical installations and the events industry. All switchgear and Tri-rated wiring is housed within a purpose built polyethylene enclosure, with recessed socket and switchgear panels for mechanical protection. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The enclosure incorporates integrated carry handles, common stacking rails, external brass earth stud and all necessary electrical hazard warning identification.

The enclosure is fabricated from black 10mm thick 300-grade high density polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, service temperature from -50 to +80°C with greater than 1014 surface resistance. IK09 Rated.

Specification:

  • Incomer: 63A 400V 3P+N+E IP67 Appliance Inlet. Protection: 63A 4 Pole C-Type MCB
  • Outgoing: 6 x 16A 400V 3P+N+E IP44 Pnl Mnt Skt. Protection: 6 x 16A 4 Pole 30mA RCBO
  • Dimensions H450 x W550 x D495 (mm)
  • Weight - 25kgs

All temporary power distribution boxes are manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty. For more information on this product, please contact [email protected]

MD47

63A Temporary Power Distribution

A 63A three-phase (400V) power distribution box designed to distribute temporary power from one area to another. The 63A plug and play distribution board is easy to relocate across site and blends in with the surrounding environment.All switchgear and Tri-rated wiring is housed within a purpose built polyethylene enclosure, with recessed socket and switchgear panels for mechanical protection. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The enclosure incorporates integrated carry handles, common stacking rails, external brass earth stud and all necessary electrical hazard warning identification.

The enclosure is fabricated from black 10mm thick 300-grade high density polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, service temperature from -50 to +80°C with greater than 1014 surface resistance. IK09 Rated.

Specification:

  • Incomer: 63A 400V 3P+N+E IP67 Appliance Inlet. Protection: 63A 4 Pole C-Type MCB
  • Outgoing: 2 x 32A 400V 3P+N+E IP44 Pnl Mnt Skt. Protection: 2 x 32A 4 Pole 30mA RCBO
  • Outgoing: 9 x 16A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 9 x 16A 2 Pole 30mA RCBO
  • Dimensions: H450 x W550 x D495
  • Weight - 25kgs

All temporary power distribution boxes are manufactured by ide Systems Ltd in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty. For more information on this product, please contact [email protected]

MD33

63A 3 Phase Distribution Board

A 63A three-phase (400V) power distribution box designed for use within temporary electrical installations and the events industry. All switchgear and Tri-rated wiring is housed within a purpose built polyethylene enclosure, with recessed socket and switchgear panels for mechanical protection. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The enclosure incorporates integrated carry handles, common stacking rails, external brass earth stud and all necessary electrical hazard warning identification.

The enclosure is fabricated from black 10mm thick 300-grade high density polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, service temperature from -50 to +80°C with greater than 1014 surface resistance. IK09 Rated.

Specification:

  • Incomer: 63A 400V 3P+N+E IP67 Appliance Inlet. Protection: No
  • Outgoing:2 x 32A 400V 3P+N+E IP44 Pnl Mnt Skt. Protection: 2 x 32A 4 Pole 30mA RCBO
  • Outgoing:6 x 32A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 6 x 32A 2 Pole 30mA RCBO
  • Outgoing:3 x 16A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 3 x 16A 2 Pole 30mA RCBO
  • Dimensions H450 x W550 x D495 (mm)
  • Weight - 25kg

All temporary power distribution boxes are manufactured by ide Systems Ltd in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty. For more information, please contact [email protected]

MD31

63A Temporary Power Distribution

A 63A three-phase (400V) power distribution box designed to distribute temporary power from one area to another. The 63A plug and play distribution board is easy to relocate across site and blends in with the surrounding environment. All switchgear and Tri-rated wiring is housed within a purpose built polyethylene enclosure, with recessed socket and switchgear panels for mechanical protection. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The enclosure incorporates integrated carry handles, common stacking rails, external brass earth stud and all necessary electrical hazard warning identification.

The enclosure is fabricated from black 10mm thick 300-grade high density polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, service temperature from -50 to +80°C with greater than 1014 surface resistance. IK09 Rated.

Specification:

  • Incomer: 63A 400V 3P+N+E IP67 Appliance Inlet. Protection: 63A 4 Pole C-Type MCCB
  • Outgoing: 63A 400V 3P+N+E IP44 Pnl Mnt Skt. Feedthrough not protected
  • Outgoing:2 x 32A 400V 3P+N+E IP44 Pnl Mnt Skt. Protection: 2 x 32A 4Pole C-Type MCB c/w Adjustable Earth Leakage
  • Outgoing:3 x 32A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 3 x 32A 2 Pole 30mA C-Type RCBO
  • Outgoing:9 x 16A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 9 x 16A 2 Pole 30mA C-Type RCBO
  • Dimensions H600 x W550 x D495 (mm)
  • Weight - 36kg

All temporary power distribution boxes are manufactured by ide Systems Ltd in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty. For more information on this product, please contact [email protected]

MD24

63a Power Distribution Box

A 63A three-phase (400V) power distribution box designed to distribute temporary power from one area to another. The 63A plug and play distribution board is easy to relocate across site and blends in with the surrounding environment. All switchgear and Tri-rated wiring is housed within an insulated thermoplastic enclosure, with recessed socket and switchgear panels for mechanical protection. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The enclosure incorporates integrated carry handles, stacking feet/raisers, external brass earth stud and all necessary electrical hazard warning identification.

The enclosure material is black 4mm LLDPE, a robust and shock resistant thermoplastic, complete with foam rubber sealing material (EPDM). IK10 rated.

Specification:

  • Incomer: 63A 400V 3P+N+E IP67 Appliance Inlet. Protection: No
  • Outgoing: 1 x 63A 400V 3P+N+E IP67 Pnl Mnt Skt (through). Protection: No
  • Outgoing: 6 x 32A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 6 x 32A 2 Pole 30mA RCBO
  • Outgoing: 6 x 16A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 6 x 16A 2 Pole 30mA RCBO
  • Dimensions H340 x W560 x D350 (mm)
  • Weight 17kg -

All temporary power distribution boxes are manufactured by ide Systems Ltd in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty.

MD8

63A Distro

A 63A three-phase (400V) power distribution box designed to distribute temporary power from one area to another. The 63A plug and play distribution board is easy to relocate across site and blends in with the surrounding environment. All switchgear and Tri-rated wiring is housed within a purpose built polyethylene enclosure, with recessed socket and switchgear panels for mechanical protection. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The enclosure incorporates integrated carry handles, common stacking rails, external brass earth stud and all necessary electrical hazard warning identification.

The enclosure is fabricated from black 10mm thick 300-grade high density polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, service temperature from -50 to +80°C with greater than 1014 surface resistance. IK09 Rated.

Specification:

  • Incomer: 63A 400V 3P+N+E IP67 Appliance Inlet. Protection: 63A 4 Pole C-Type MCB
  • Outgoing: 6 x 32A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 6 x 32A 2 Pole 30mA RCBO
  • Dimensions: H450 x W550 x D495 (mm)
  • Weight - 17kgs

All temporary power distribution boxes are manufactured by ide Systems Ltd in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty. For more information on this product, please contact [email protected]

MD7

63A Distribution Board

A 63A three-phase (400V) power distribution box designed to distribute temporary power from one area to another. The 63A plug and play distribution board is easy to relocate across site and blends in with the surrounding environment. All switchgear and Tri-rated wiring is housed within a purpose built polyethylene enclosure, with recessed socket and switchgear panels for mechanical protection. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The enclosure incorporates integrated carry handles, common stacking rails, external brass earth stud and all necessary electrical hazard warning identification.

The enclosure is fabricated from black 10mm thick 300-grade high density polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, service temperature from -50 to +80°C with greater than 1014 surface resistance. IK09 Rated.

Specification:

  • Incomer: 63A 400V 3P+N+E IP67 Appliance Inlet. Protection: 63A 4 Pole C-Type MCB
  • Outgoing: 4 x 32A 400V 3P+N+E IP44 Pnl Mnt Skt. Protection: 4 x 32A 4 Pole 30mA RCBO
  • Outgoing: 1 x 63A 400V 3P+N+E IP67 Pnl Mnt Skt (through). Protection: N/A
  • Dimensions H450 x W550 x D495 (mm)
  • Weight - 23kgs

All temporary power distribution boxes are manufactured by ide Systems Ltd in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty. For more information on this product, please contact [email protected]

MD6

63A Distro

A 63A three-phase (400V) rubber box distribution board designed to distribute temporary power from one area to another. The 63A plug and play distribution board is easy to relocate across site and blends in with the surrounding environment. All switchgear and Tri-rated wiring is housed within a solid cast rubber enclosure. An integrated transparent window is used to allow visual identification of the switchgear status and allow access in event of a trip. Incoming 63A supply plug sits on a 16mm 5 core 1 metre H07RN-F flying lead to allow ease of connection to a socket outlet.

The enclosure is a black, self extinguishing, fully insulated, stackable, hard butyl rubber spider, with high resistance to chemical agents, atmospherics and current leakage. IK10 rated.

Specification:

  • Incomer: 63A 400V 3P+N+E IP67 Plug on 1 metre Lead. Protection: No
  • Outgoing: 2 x 32A 400V 3P+N+E IP44 Pnl Mnt Skt. Protection: 2 x 32A 4 Pole MCB
  • Outgoing: 1 x 63A 400V 3P+N+E IP67 Pnl Mnt Skt (through). Protection: N/A
  • Dimensions: H350 x W450 x D400 (mm)
  • Weight - 12kgs

All temporary power distribution boxes are manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty For more information on this product, please contact [email protected]

MD19

63 amp distro box

A 63A single-phase (230V) rubber box distribution board designed to distribute temporary power from one area to another. The 63A plug and play distribution board is easy to relocate across site and blends in with the surrounding environment. All switchgear and Tri-rated wiring is housed within a solid cast rubber enclosure. An integrated transparent window is used to allow visual identification of the switchgear status and allow access in event of a trip. The enclosure incorporates a carry handle, stacking feet/raisers and all necessary electrical hazard warning identification.

The enclosure is a black, self extinguishing, fully insulated, stackable, hard butyl rubber spider, with high resistance to chemical agents, atmospherics and current leakage. IK10 rated.

Specification:

  • Incomer: 63A 230V 1P+N+E IP67 Plug. Protection: No
  • Outgoing: 2 x 32A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 2 x 32A 2 Pole 30mA RCBO
  • Outgoing: 2 x 16A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 2 x 16A 2 Pole 30mA RCBO
  • Dimensions H340 x W450 x D400 (mm)
  • Weight - 13kgs

All temporary power distribution boxes are manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty. For more information on this product, please contact [email protected]

MD27

63A Distribution Board

A 63A three-phase (400V) rubber box distribution unit designed to distribute temporary power from one area to another. The 63A plug and play distribution board is easy to relocate across site and blends in with the surrounding environment. All switchgear and Tri-rated wiring is housed within a solid cast rubber enclosure. An integrated transparent window is used to allow visual identification of the switchgear status and allow access in event of a trip. Incoming 63A supply plug sits on a 16mm 5 core 1 metre H07RN-F flying lead to allow ease of connection to an outlet. The enclosure incorporates a carry handle, stacking feet/raisers and all necessary electrical hazard warning identification.

The enclosure is a black, self extinguishing, fully insulated, stackable, hard butyl rubber spider, with high resistance to chemical agents, atmospherics and current leakage. IK10 rated.

Specification:

  • Incomer: 63A 400V 3P+N+E IP67 Plug on 1m Lead. Protection: No
  • Outgoing: 2 x 32A 400V 3P+N+E IP44 Pnl Mnt Skt. Protection: 2 x 32A 4 Pole 30mA RCBO
  • Dimensions H350 x W450 x D400 (mm)
  • Weight 13kg

All temporary power distribution boxes are manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty. For more information on this product, please contact [email protected]

MD29

Power Distribution Box

A 63A single-phase (230V) rubber box distribution board designed to distribute temporary power from one area to another. The 63A plug and play distribution board is easy to relocate across site and blends in with the surrounding environment. All switchgear and Tri-rated wiring is housed within a solid cast rubber enclosure. An integrated transparent window is used to allow visual identification of the switchgear status and allow access in event of a trip. Incoming 63A supply plug sits on a 16mm 3 core 1 metre H07RN-F flying lead to allow ease of connection to a socket outlet.The enclosure incorporates a carry handle, stacking feet/raisers and all necessary electrical hazard warning identification.

The enclosure is a black, self extinguishing, fully insulated, stackable, hard butyl rubber spider, with high resistance to chemical agents, atmospherics and current leakage. IK10 rated.

Specification:

  • Incomer: 63A 230V 1P+N+E IP67 Plug on 1m lead
  • Outgoing: 4 x 16A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 4 x 16A 2 Pole 30mA RCBO
  • Dimensions H350 x W450 x D400
  • Weight - 10kgs

All temporary power distribution boxes are manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty. For more information on this product, please contact [email protected]

MD2

63A Power Distribution Box

A 63A three-phase (400V) power distribution box designed to distribute temporary power from one area to another. The 63A plug and play temporary power distribution board is easy to relocate across site and blends in with the surrounding environment. All switchgear and Tri-rated wiring is housed within a purpose built high density polyethylene enclosure (HDPE) , with recessed socket and switchgear panels for mechanical protection. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The enclosure incorporates integrated carry handles, common stacking rails, external brass earth stud and all necessary electrical hazard warning identification.

The enclosure is fabricated from black 10mm thick 300-grade high density polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, service temperature from -50 to +80°C with greater than 1014 surface resistance. IK09 Rated.

Specification:

  • Incomer: 63A 400V 3P+N+E IP67 Appliance Inlet. Protection: 63A 4 Pole C-Type MCB
  • Outgoing: 6 x 32A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 6 x 32A 2 Pole 30mA RCBO
  • Outgoing: 12 x 16A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 12 x 16A 2 Pole 30mA RCBO
  • Outgoing: 63A 400V 3P+N+E IP67 Pnl Mnt Skt (through). Protection: N/A
  • Dimensions: H610 x W525 x D470 (mm)
  • Weight - 32kg

All temporary power distribution equipment is manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification). The products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty. All IDE temporary power distribution boxes are built with Mennekes sockets and ABB switchgear as standard.
This 63A power distribution box is available to purchase or hire. For more information, please contact [email protected]

MD3 Spider Box

Temporary Power Distribution Spider Box

A 125A three-phase (400V) temporary power distribution spider box designed to distribute temporary power from one area to another. The 125A 3 phase temporary power distribution spider box has a plug and play design, which makes it easy to relocate across site and blends in with the surrounding environment. All switchgear and Tri-rated wiring is housed within a solid case rubber box enclosure.  Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The enclosure incorporates integrated carry handles, common stacking rails, external brass earth stud and all necessary electrical hazard warning identification.

The enclosure is black, self extinguishing, fully insulated, stackable, hard butyl, rubber spider, with high resistance to chemical agents, atmospherics and current leakage.

Specification:

  • Incomer: 125A 400V 3P+N+E IP67 Appliance Inlet. Protection: No
  • Outgoing: 3 x 63A 400V 3P+N+E IP67 Pnl Mnt Skt. Protection: 3 x 63A 4 Pole C-Type MCB
  • Dimensions H350 x W450 x D400 (mm)
  • Weight - 15kgs

All temporary power distribution boxes are manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty. All IDE products are fitted with Mennekes sockets and ABB switchgear. For more information on this product, please contact [email protected]

MD125

Power Distribution Box

A 125A three-phase (400V) power distribution boards designed to distribute temporary power from one area to another. The 125A 3 phase plug and play distribution board is easy to relocate across site and blends in well with the surrounding environment. All switchgear and Tri-rated wiring is housed within a purpose built polyethylene enclosure, with recessed socket and switchgear panels for mechanical protection. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The enclosure incorporates integrated carry handles, common stacking rails, external brass earth stud and all necessary electrical hazard warning identification.

The enclosure is fabricated from black 10mm thick 300-grade high density polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, service temperature from -50 to +80°C with greater than 1014 surface resistance. IK09 Rated.

Specification:

  • Incomer: 125A 400V 3P+N+E IP67 Appliance Inlet. Protection: 125A 4 Pole C-Type MCB
  • Outgoing: 3 x 125A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 3 x 125A 2 Pole C-Type MCB
  • Dimensions H450 x W550 x D495 (mm)
  • Weight - 26kgs

All temporary power distribution boxes are manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty. For more information, please contact [email protected]

MD35

125A Temporary Power Distribution Box

A 125A three-phase (400V) temporary power distribution box designed to distribute temporary power from one area to another. The 125A 3 phase plug and play distribution board is easy to relocate across site and blends in well with the surrounding environment. All switchgear and Tri-rated wiring is housed within a purpose built polyethylene enclosure, with recessed socket and switchgear panels for mechanical protection. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The enclosure incorporates integrated carry handles, common stacking rails, external brass earth stud and all necessary electrical hazard warning identification.

The enclosure is fabricated from black 10mm thick 300-grade high density polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, service temperature from -50 to +80°C with greater than 1014 surface resistance. IK09 Rated.

Specification:

  • Incomer: 125A 400V 3P+N+E IP67 Appliance Inlet. Protection: 125A 4 Pole MCCB
  • Outgoing: 6 x 32A 400V 3P+N+E IP44 Pnl Mnt Skt. Protection: 6 x 32A 4 Pole 30mA RCBO
  • Dimensions H450 x W550 x D495 (mm)
  • Weight - 30kgs

All temporary power distribution boxes are manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty. For more information, please contact [email protected]

MD30

125A Power Distribution Box

A 125A three-phase (400V) power distribution box designed to distribute temporary power from one area to another. The 125A 3 phase plug and play distribution board is easy to relocate across site and blends in well with the surrounding environment. All switchgear and Tri-rated wiring is housed within a purpose built polyethylene enclosure, with recessed socket and switchgear panels for mechanical protection. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The enclosure incorporates integrated carry handles, common stacking rails, external brass earth stud and all necessary electrical hazard warning identification.

The enclosure is fabricated from black 10mm thick 300-grade high density polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, service temperature from -50 to +80°C with greater than 1014 surface resistance. IK09 Rated.

Specification:

  • Incomer: 125A 400V 3P+N+E IP67 Appliance Inlet. Protection: 125A 4 Pole C-Type MCCB
  • Outgoing:2 x 63A 400V 3P+N+E IP44 Pnl Mnt Skt. Protection: 2 x 63A 4 Pole C-Type MCB c/w Adjustable Earth Leakage
  • Outgoing:2 x 32A 400V 3P+N+E IP44 Pnl Mnt Skt. Protection: 2 x 32A 4Pole C-Type MCB c/w Adjustable Earth Leakage
  • Outgoing:3 x 32A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 3 x 32A 2 Pole 30mA RCBO
  • Outgoing:9 x 16A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 9 x 16A 2 Pole 30mA RCBO
  • Dimensions H750 x W550 x D495 (mm)
  • Weight - 48kg

All temporary power distribution boxes are manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty. For more information, please contact [email protected]

MD28

125A Event Distribution Board

A 125A three-phase (400V) power distribution box designed to distribute temporary power from one area to another. The 125A 3 phase plug and play distribution board is easy to relocate across site and blends in well with the surrounding environment. All switchgear and Tri-rated wiring is housed within a purpose built polyethylene enclosure, with recessed socket and switchgear panels for mechanical protection. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The enclosure incorporates integrated carry handles, common stacking rails, external brass earth stud and all necessary electrical hazard warning identification.

The enclosure is fabricated from black 10mm thick 300-grade high density polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, service temperature from -50 to +80°C with greater than 1014 surface resistance. IK09 Rated.

Specification:

  • Incomer: 125A 400V 3P+N+E IP67 Appliance Inlet. Protection: 125A 4 Pole C-Type MCCB
  • Outgoing: 3 x 32A 400V 3P+N+E IP44 Pnl Mnt Skt. Protection: 3 x 32A 4 Pole 30mA RCBO
  • Outgoing: 3 x 63A 400V 3P+N+E IP67 Pnl Mnt Skt. Protection: 3 x 63A 4 Pole C-Type MCB
  • Dimensions H450 x W550 x D495 (mm)
  • Weight - 30kgs

All temporary power distribution boxes are manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty. For more information, please contact [email protected]

MD10

Generator Distribution Board

A 125A three-phase 400V power distribution box designed to distribute temporary power from one area to another. The 125A 3 phase plug and play distribution board is easy to relocate across site and blends in well with the surrounding environment. All switchgear and Tri-rated wiring is housed within a purpose built polyethylene enclosure, with recessed socket and switchgear panels for mechanical protection. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The enclosure incorporates integrated carry handles, common stacking rails, external brass earth stud and all necessary electrical hazard warning identification.

The enclosure is fabricated from black 10mm thick 300-grade high density polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, service temperature from -50 to +80°C with greater than 1014 surface resistance. IK09 Rated.

Specification:

  • Incomer: 125A 400V 3P+N+E IP67 Appliance Inlet. Protection: 125A 4 Pole MCCB
  • Outgoing: 3 x 63A 400V 3P+N+E IP67 Pnl Mnt Skt. Protection: 3 x 63A 4 Pole C-Type MCB + 4 Pole 100mA RCD
  • Outgoing: 3 x 63A 230V 1P+N+E IP67 Pnl Mnt Skt. Protection: 3 x 63A 2 Pole C-Type MCB + 2 Pole 100mA RCD
  • Outgoing: 3 x 32A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 3 x 32A 2 Pole 30mA RCBO
  • Outgoing: 3 x 16A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 3 x 16A 2 Pole 30mA RCBO
  • Dimensions H600 x W550 x D495 (mm)
  • Weight - 45kgs

All temporary power distribution boxes are manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty. For more information, please contact [email protected]

MD5

125A Distribution Board

A 125A three-phase (400V) power distribution box designed to distribute temporary power from one area to another. The 125A 3 phase plug and play distribution board is easy to relocate across site and blends in well with the surrounding environment. All switchgear and Tri-rated wiring is housed within a purpose built polyethylene enclosure, with recessed socket and switchgear panels for mechanical protection. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The enclosure incorporates integrated carry handles, common stacking rails, external brass earth stud and all necessary electrical hazard warning identification.

The enclosure is fabricated from black 10mm thick 300-grade high density polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, service temperature from -50 to +80°C with greater than 1014Ω surface resistance. IP55 Rated.

Specification:

  • Incomer: 125A 400V 3P+N+E IP67 Appliance Inlet. Protection: 125A 4 Pole MCCB
  • Outgoing: 6 x 32A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 6 x 32A 2 Pole 30mA RCBO
  • Outgoing: 18 x 16A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 18 x 16A 2 Pole 30mA RCBO
  • Dimensions H600 x W550 x D495 (mm)
  • Weight - 36kg

All temporary power distribution boxes are manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty. For more information, please contact [email protected]

MD3

125A Event Distro

A 125A three-phase (400V) power distribution box designed to distribute temporary power from one area to another. The 125A 3 phase plug and play distribution board is easy to relocate across site and blends in with the surrounding environment. All switchgear and Tri-rated wiring is housed within a purpose built polyethylene enclosure, with recessed socket and switchgear panels for mechanical protection. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The enclosure incorporates integrated carry handles, common stacking rails, external brass earth stud and all necessary electrical hazard warning identification.

The enclosure is fabricated from black 10mm thick 300-grade high density polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, service temperature from -50 to +80°C with greater than 1014 surface resistance. IK09 Rated.

Specification:

  • Incomer: 125A 400V 3P+N+E IP67 Appliance Inlet. Protection: No
  • Outgoing: 3 x 63A 400V 3P+N+E IP67 Pnl Mnt Skt. Protection: 3 x 63A 4 Pole C-Type MCB
  • Dimensions H300 x W400 x D500 (mm)
  • Weight - 19kgs

All temporary power distribution boxes are manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty. For more information on this product, please contact [email protected]

MD1

125A Distro

A 125A three-phase (400V) power distribution box designed to distribute temporary power from one area to another. The 125A 3 phase plug and play distribution board is easy to relocate across site and blends in with the surrounding environment. All switchgear and Tri-rated wiring is housed within a purpose built polyethylene enclosure, with recessed socket and switchgear panels for mechanical protection. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The enclosure incorporates integrated carry handles, common stacking rails, external brass earth stud and all necessary electrical hazard warning identification.

The enclosure is fabricated from black 10mm thick 300-grade high density polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, service temperature from -50 to +80°C with greater than 1014 surface resistance. IK09 Rated.

Specification:

  • Incomer: 125A 400V 3P+N+E IP67 Appliance Inlet. Protection: 125A 4 Pole MCCB
  • Outgoing: 3 x 63A 400V 3P+N+E IP67 Pnl Mnt Skt. Protection: 3 x 63A 4 Pole C-Type MCB and 100mA RCD
  • Outgoing: 6 x 63A 230V 1P+N+E IP67 Pnl Mnt Skt. Protection: 6 x 63A 2 Pole C-Type MCB and 100mA RCD
  • Dimensions: H600 x W550 x D495
  • Weight 41kgs

All temporary power distribution boxes are manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty. For more information on this product, please contact [email protected]

MD32

125A Distribution Board

A 125A three-phase (400V) power distro box designed to distribute temporary power from one area to another. The 125A distro is plug and play which means that it is easy to relocate across site and blends in well with the surrounding environment. All switchgear and Tri-rated wiring is housed within a purpose built high density polyethylene enclosure, with recessed socket and switchgear panels for mechanical protection. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The enclosure incorporates integrated carry handles, common stacking rails, external brass earth stud and all necessary electrical hazard warning identification.

The enclosure is fabricated from black 10mm thick 300-grade high density polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, service temperature from -50 to +80°C with greater than 1014 surface resistance. IK09 Rated.

Specification:

  • Incomer: 125A 400V 3P+N+E IP67 Appliance Inlet. Protection: 125A 4 Pole MCCB
  • Outgoing: 63A 400V 3P+N+E IP44 Pnl Mnt Skt. Protection: 63A 4 Pole C-Type MCB
  • Outgoing: 2 x 32A 400V 3P+N+E IP44 Pnl Mnt Skt. Protection: 2 x 32A 4 Pole 30mA RCBO
  • Outgoing:12 x 32A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 12 x 32A 2 Pole 30mA RCBO
  • Outgoing: 6 x 16A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 6 x 16A 2 Pole 30mA RCBO
  • Dimensions: H600 x W550 x D495 (mm)
  • Weight - 41kg

All temporary power distribution equipment is manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification). The products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty. All IDE temporary power distros are built with Mennekes sockets and ABB switchgear as standard.
This 125A distro is available to purchase or hire. For more information, please contact [email protected]

MD408

400A Event Power Distribution

A 400A three-phase (400V) power distribution board designed to distribute temporary power from one area to another. The 400A plug and play distribution board is easy to relocate across site and blends in well with the surrounding environment. All switchgear and Tri-rated wiring is housed within a purpose built polyethylene enclosure, with recessed socket and switchgear panels for mechanical protection. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The inlet supply has a phase rotation monitor and each outlet has a red ‘Power On’ neon light. External brass earth stud. Complete unit mounted within a stainless steel crash frame with forklift pockets.

The enclosure is fabricated from black 10mm thick 300-grade high density polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, service temperature from -50 to +80°C with greater than 1014 surface resistance. IK09 Rated.

Specification:

  • Incomer: 400A 400V 3P+N+E Powerlock Drain Connectors. Protection: 400A 4 Pole MCCB
  • Outgoing: 400A 400V 3P+N+E Powerlock Source Connectors (through). Protection: N/A
  • Outgoing: 4 x 125A 400V 3P+N+E IP67 Pnl Mnt Skt. Protection: 4 x 125A 4 Pole MCCB c/w Adjustable/Switchable Earth Leakage
  • Outgoing: 2 x 63A 400V 3P+N+E IP67 Pnl Mnt Skt. Protection: 2 x 63A 4 Pole C-Type MCB & 100mA RCD
  • Dimensions: H1092 x W612 x D495
  • Weight: 105kgs

All temporary power distribution equipment is manufactured by IDE  in the UK and tested to BS 7671 (12 Months Certification). The products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty.
This 400A temporary power distribution product is available to purchase or hire. For more information, please contact [email protected]

MD407

event power distribution

A 400A three-phase (400V) power distribution board designed to distribute temporary power from one area to another. The 400A plug and play distribution board is easy to relocate across site and blends in well with the surrounding environment. All switchgear and Tri-rated wiring is housed within a purpose built polyethylene enclosure, with recessed socket and switchgear panels for mechanical protection. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. Enclosure incorporates integrated lifting handles and rails for ease of handling and stacking. Inlet supply has phase rotation monitor and each outlet has a red ‘Power On’ neon light. External brass earth stud.

The enclosure is fabricated from black 10mm thick 300-grade high density polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, service temperature from -50 to +80°C with greater than 1014 surface resistance. IK09 Rated.

Specification:

  • Incomer: 400A 400V 3P+N+E Powerlock Drain Connectors. Protection: 400A 4 Pole C-Type MCCB
  • Outgoing: 2 x 125A 400V 3P+N+E IP67 Pnl Mnt Skt. Protection: 2 x 125A 4 Pole C-Type MCCB c/w Adjustable/Switchable Earth Leakage
  • Dimensions: H450 x W550 x D495
  • Weight: 45kgs

All temporary power distribution boxes are manufactured by ide Systems Ltd in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty.

MD406

400A Temporary Power Distribution

A 400A three-phase (400V) power distribution board designed to distribute temporary power from one area to another. The 400A plug and play distribution board is easy to relocate across site and blends in well with the surrounding environment. All switchgear and Tri-rated wiring is housed within a purpose built polyethylene enclosure, with recessed socket and switchgear panels for mechanical protection. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The inlet supply has a phase rotation monitor and each outlet has a red ‘Power On’ neon light. External brass earth stud. Complete unit mounted within a stainless steel crash frame with forklift pockets.

The enclosure is fabricated from black 10mm thick 300-grade high density polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, service temperature from -50 to +80°C with greater than 1014 surface resistance. IK09 Rated.

Specification:

  • Incomer: 400A 400V 3P+N+E Powerlock Drain Connectors. Protection: 400A 4 Pole MCCB
  • Outgoing: 400A 400V 3P+N+E Powerlock Source Connectors. Protection: N/A
  • Outgoing: 2 x 125A 400V 3P+N+E IP67 Pnl Mnt Skt. Protection: 2 x 125A 4 Pole MCCB c/w Adjustable/Switchable Earth Leakage
  • Outgoing: 4 x 63A 400V 3P+N+E IP67 Pnl Mnt Skt. Protection: 4 x 63A 4 Pole C-Type MCB & 100mA RCD
  • Dimensions: H1092 x W612 x D495
  • Weight 100kgs

All temporary power distribution equipment is manufactured by IDE  in the UK and tested to BS 7671 (12 Months Certification). The products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty.
This 400A temporary power distribution product is available to purchase or hire. For more information, please contact [email protected]

MD405

400A Power Distribution

A 400A three-phase (400V) powerlock distribution board designed to distribute temporary power from one area to another. The 400A plug and play distribution board is easy to relocate across site and blends in well with the surrounding environment. All switchgear and Tri-rated wiring is housed within a purpose built polyethylene enclosure, with recessed socket and switchgear panels for mechanical protection. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. Enclosure incorporates integrated lifting handles and rails for ease of handling and stacking. Inlet supply has phase rotation monitor and each outlet has a red ‘Power On’ neon light. External brass earth stud.

The enclosure is fabricated from black 10mm thick 300-grade high density polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, service temperature from -50 to +80°C with greater than 1014 surface resistance. IK09 Rated.

Specification:

  • Incomer: 400A 400V 3P+N+E Powerlock Drain Connectors. Protection: 400A 4 Pole MCCB
  • Outgoing: 6 x 63A 400V 3P+N+E IP67 Pnl Mnt Skt. Protection: 6 x 63A 4 Pole C-Type MCB c/w Adjustable/Switchable Earth Leakage
  • Dimensions H750 x W550 x D495
  • Weight 68kgs

All temporary power distribution equipment is manufactured by IDE  in the UK and tested to BS 7671 (12 Months Certification). The products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty.
This 400A temporary power distribution product is available to purchase or hire. For more information, please contact [email protected]

MD400

400A Powerlock Distribution Board

A 400A three-phase (400V) power distribution board designed to distribute temporary power from one area to another. The 400A plug and play distribution board is easy to relocate across site and blends in well with the surrounding environment. All switchgear and Tri-rated wiring is housed within a purpose built polyethylene enclosure, with recessed socket and switchgear panels for mechanical protection. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The inlet supply has a phase rotation monitor and each outlet has a red ‘Power On’ neon light. External brass earth stud. Complete unit mounted within a stainless steel crash frame with forklift pockets.

The enclosure is fabricated from black 10mm thick 300-grade high density polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, service temperature from -50 to +80°C with greater than 1014 surface resistance. IK09 Rated.

Specification:

  • Incomer: 400A 400V 3P+N+E Powerlock Drain Connectors. Protection: 400A 4 Pole MCCB
  • Outgoing: 400A 400V 3P+N+E Powerlock Source Connectors (through). Protection: N/A
  • Outgoing: 4 x 125A 400V 3P+N+E IP67 Pnl Mnt Skt. Protection: 4 x 125A 4 Pole MCCB c/w Adjustable/Switchable Earth Leakage
  • Dimensions H1092 x W612 x D495
  • Weight 95kgs

All temporary power distribution equipment is manufactured by IDE  in the UK and tested to BS 7671 (12 Months Certification). The products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty.
This 400A temporary power distribution product is available to purchase or hire. For more information, please contact [email protected]

MD402

400A Powerlock Distribution Board

A 400A three-phase (400V) powerlock distribution board designed to distribute temporary power from one area to another. The 400A plug and play distribution board is easy to relocate across site and blends in well with the surrounding environment. User has the option to hardwire into the standby generator using powerlock or lugged terminations. All switchgear and Tri-rated wiring is housed within a purpose built polyethylene enclosure, with recessed socket and switchgear panels for mechanical protection. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The inlet supply has a phase rotation monitor and each outlet has a red ‘Power On’ neon light. External brass earth stud. Complete unit mounted within a stainless steel crash frame with forklift pockets.

The enclosure is fabricated from black 10mm thick 300-grade high density polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, service temperature from -50 to +80°C with greater than 1014 surface resistance. IK09 Rated.

Specification:

  • Incomer: 400A 400V 3P+N+E Powerlock Drain Connectors. Protection: 400A 4 Pole MCCB
  • Outgoing: 400A 400V 3P+N+E Powerlock Source Connectors(through). Protection: N/A
  • Outgoing: 3 x 125A 400V 3P+N+E IP67 Pnl Mnt Skt. Protection: 3 x 125A 4 Pole MCCB c/w Adjustable/Switchable Earth Leakage
  • Outgoing: 3 x 63A 400V 3P+N+E IP67 Pnl Mnt Skt. Protection: 3 x 63A 4 Pole C-Type MCB & 100mA RCD
  • Outgoing: 3 x 63A 230V 1P+N+E IP67 Pnl Mnt Skt. Protection: 3 x 63A 2 Pole C-Type MCB & 100mA RCD
  • Outgoing: 3 x 32A 400V 3P+N+E IP67 Pnl Mnt Skt. Protection: 3 x 32A 4 Pole 30mA C-Type RCBO
  • Outgoing: 2 x 16A 230V 1P+N+E IP67 Pnl Mnt Skt. Protection: 2 x 16A 2 Pole 30mA C-Type RCBO
  • Dimensions:H1392 x W612 x D495
  • Weight 110kgs

All temporary power distribution equipment is manufactured by IDE  in the UK and tested to BS 7671 (12 Months Certification). The products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty.
This 400A temporary power distribution product is available to purchase or hire. For more information, please contact [email protected]

IP630S

IP630S

Three-phase inline supply/equipment protection and splitter unit for use on any temporary electrical installation. Equipment housed in a polyethylene enclosure, with recessed Socket and Switchgear panels for mechanical protection. Enclosure incorporates integrated lifting handles and rails for ease of handling and stacking. External brass earth stud.

10mm thick 300-Grade High Density Polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, impact strength of 10 kJ/m², service temperature from -50 to +80°C, with greater than 1014Ω surface resistance. IP54 Rated.

Specification:

  • Incomer: 630A 400V 3P+N+E Powerlock drain connectors.
  • Outgoing: 2 x 630A 400V Powerlock source connectors.
  • Protection: 630A 4 pole MCCB
  • Dimensions: H450 x W550 x D495 (mm)
  • Weight: - 40kgs

All temporary power distribution boxes are manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty. For more information, please contact [email protected]

IP630

IP630 distribution unit

630A Three-phase inline supply/equipment protection unit for use on any temporary electrical installation. Equipment housed in a polyethylene enclosure, with recessed Socket and Switchgear panels for mechanical protection. Enclosure incorporates integrated lifting handles and rails for ease of handling and stacking. External brass earth stud.

Enclosure manufactured from 10mm thick 300-Grade High Density Polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, impact strength of 10 kJ/m², service temperature from -50 to +80°C, with greater than 1014Ω surface resistance. IP54 Rated.

Specification:

  • Incomer: 630A 400V 3P+N+E Powerlock drain connectors.
  • Outgoing: 630A 400V Powerlock source connectors.
  • Protection: 630A 4P MCCB
  • Dimensions: H450 x W550 x D495 (mm)
  • Weight: - 40kgs

All temporary power distribution boxes are manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty. For more information, please contact [email protected]

IP400

IP400 distribution unit

400A Three-phase inline supply/equipment protection unit for use on any temporary electrical installation. Equipment housed in a polyethylene enclosure, with recessed Socket and Switchgear panels for mechanical protection. Enclosure incorporates integrated lifting handles and rails for ease of handling and stacking. External brass earth stud.

Enclosure manufactured from 10mm thick 300-Grade High Density Polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, impact strength of 10 kJ/m², service temperature from -50 to +80°C, with greater than 1014Ω surface resistance. IP54 Rated.

Specification:

  • Incomer: 400A 400V 3P+N+E Powerlock drain connectors.
  • Outgoing: 400A 400V Powerlock source connectors.
  • Protection: 400A 4P MCCB
  • Dimensions H450 x W550 x D495 (mm)
  • Weight - 27kgs

All temporary power distribution boxes are manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty. For more information, please contact [email protected]

AMF 125 Event

Event Changeover Panel

Three-phase Auto Mains Fail (AMF) unit allows automatic connection of a secondary electrical supply to a load upon failure of the primary. Mechanically and electronically interlocked AC1 rated contactors. No volt connection for remote Generator start. Auxiliary power supply for Generator battery charging or jacket water heater. 3 Position key switch for Auto, Generator run and Inhibit mains restore. Supply availability neon’s for visual representation of status. Incoming supply adjustable undervolt and time delay relays for setting of individual supply parameters. All Equipment housed in a polyethylene enclosure, with recessed Socket and Switchgear panels for mechanical protection. Enclosure incorporates integrated lifting handles and rails for ease of handling and stacking.  External brass earth studs.

The enclosure is fabricated from 10mm thick 300-Grade High Density Polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, impact strength of 10 kJ/m², service temperature from -50 to +80°C, with greater than 1014Ω surface resistance. IP55 Rated.

  • Input 1 (Mains): 125A 400V 5 pin IP67 inlet. Protection: 125A 4 pole contactor
  • Input 2 (Generator): 125A 400V 5 pin IP67 inlet. Protection: 125A 4 pole contactor
  • Outgoing (Load) : 125A 400V 5 pin IP67 socket. Protection: N/A
  • Aux: 16A 230V 3 Pin IP44 socket. Protection: 16A 2 Pole 30mA RCBO
  • Dimensions H600 x W550 x D495 (mm)
  • Weight - 45kgs

All AMF changeover panels are manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty. For more information, please contact [email protected]

IP63

IP63 Inline Protection Unit

63A three-phase personnel protection unit for use on any temporary electrical installation.  Equipment housed in a solid cast rubber spider enclosure, with integrated transparent Mod window protected Switchgear, fixed carry handle and rising feet for ease of stacking. Inlet on a rated flying H07RN-F lead to aid connection to generator or distribution board.

Self extinguishing, fully insulated, hard butyl rubber enclosure. Resistant to atmospherics and chemical agents. IP55 Rated.

  • Incomer: 63A 400V IP67 Plug
  • Outgoing: 63A 400V 5 Pin IP67 socket.
  • Protection: 63A 4 pole 30mA RCD
  • Dimensions H350 x W450 x D400 (mm)
  • Weight - 12kgs

All temporary power distribution boxes are manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty. For more information, please contact [email protected]

AMF 400 Event

400A Event Changeover Panel

A 400A three-phase (400V) Automatic Mains Failure (AMF) changeover panel is designed to divert power from your main generator to your standby generator in the event of a power failure. Mechanically and electronically interlocked AC1 rated contactors. No volt connection for remote Generator start. Auxiliary power supply for Generator battery charging or jacket water heater. 3 Position key switch for Auto, Generator run and Inhibit mains restore. Supply availability neon’s for visual representation of status. Incoming supply adjustable undervolt and time delay relays for setting of individual supply parameters. All Equipment housed in a polyethylene enclosure, with recessed Socket and Switchgear panels for mechanical protection. External brass earth studs. Complete unit mounted within a stainless steel crash frame with forklift pockets.

10mm thick 300-Grade High Density Polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, impact strength of 10 kJ/m², service temperature from -50 to +80°C, with greater than 1014Ω surface resistance. IP55 Rated.

Specification:

  • Incomer: 400A 400V 3P+N+E IP67 Appliance Inlet. (Mains and Generator).
  • Outgoing: 400A 400V Powerlocks (inc 16A 1P+N+E Battery Charger Socket)
  • Dimensions H942 x W612 x D495 (mm)
  • Weight - 88kgs

All temporary power distribution equipment is manufactured by IDE in the UK and tested to BS 7671 (12 Months certification) and the products used within our distribution systems conform to EN 60309, EN 60947, EN 60529 and have a 12 month warranty.
This 400A event changeover panel is available to purchase or hire. For more information, please contact [email protected]

IP32

32A Inline Protection Distribution Board

32A Three-phase inline supply/equipment protection unit for use on any temporary electrical installation. Equipment housed in a solid cast rubber spider enclosure, with integrated transparent Mod window protected switchgear, fixed carry handle and rising feet

Equipment housed in a self extinguishing, fully insulated, hard butyl rubber enclosure which is resistant to atmospherics and chemical agents. IP55 rated.

Specification:

  • Incomer: 32A 400V IP67 Plug
  • Outgoing: 400A 400V Powerlock source connectors.
  • Protection: 32A 400V IP67 Socket
  • Dimensions H350 x W450 x D400 (mm)
  • Weight - 10kgs

125A Three Phase Cable

125A Three Phase Cable

125A three phase cable is designed to connect the temporary power network from the generator directly to the end user.

The 125A three phase (400V) extension lead is fitted with a 125A 5 pin IP67 Mennekes plug and coupler at each end.

The cable used is 35mm 5core H07RN-F Double insulated, Ethylene Propylene Rubber, flexible cable designed to withstand; the weather, oils/greases, mechanical and thermal stresses. Conforms to BS EN 7919.

Approximate weight per metre - 3.2kg

All  cable is available to purchase or hire and can be made up in lengths ranging from 1-100M.

For more information on our 125A three phase cable please contact [email protected]

63A Three Phase Cable

63A Three Phase Cable

63A three phase cable is designed to connect the temporary power network from the generator directly to the end user.

The 63A three phase (400V) extension lead is fitted with a 63A 5 pin IP67 Mennekes plug and coupler at each end.

The cable used is 16mm 5core H07RN-F Double insulated, Ethylene Propylene Rubber, flexible cable designed to withstand; the weather, oils/greases, mechanical and thermal stresses. Conforms to BS EN 7919.

Approximate weight per metre - 1.5kg

All  cable is available to purchase or hire and can be made up in lengths ranging from 1-100M.

For more information on our 63A three phase cable please contact [email protected]

63A Single Phase Cable

63A Single Phase Cable

63A single phase cable is designed to connect the temporary power network from the generator directly to the end user.

The 63A single phase (230V) extension lead is fitted with a 63A 3 pin IP67 Mennekes plug and coupler at each end.

The cable used is 16mm 3core H07RN-F Double insulated, Ethylene Propylene Rubber, flexible cable designed to withstand; the weather, oils/greases, mechanical and thermal stresses. Conforms to BS EN 7919.

Approximate weight per metre - 1kg

All cable is available to purchase or hire and can be made up in lengths ranging from 1-100M.

For more information on our 63A single phase cable please contact [email protected]

120mm Cable

120mm cable

120mm single-core HO7RN-F  cable  terminated with powerlock ends (source and drain) or lugged ends to make connections to standby or permanent generators.

The cable used is H07RN-F Double insulated, Ethylene Propylene Rubber, flexible cable designed to withstand; the weather, oils/greases, mechanical and thermal stresses. Conforms to BS EN 7919.

All of our 120mm cable solutions are available for purchase or hire and can be turned around quickly to support your project.

Approx weight per metre (5 wire set - L1, L2, L3, Earth and Neutral): 9kg

For more information on our 120mm cable please contact [email protected]

150mm Cable

150mm cable

150mm single-core HO7RN-F  cable  terminated with powerlock ends (source and drain) or lugged ends to make connections to standby or permanent generators.

The cable used is H07RN-F Double insulated, Ethylene Propylene Rubber, flexible cable designed to withstand; the weather, oils/greases, mechanical and thermal stresses. Conforms to BS EN 7919.

All of our 150mm cable solutions are available for purchase or hire and can be turned around quickly to support your project.

Approx weight per metre (5 wire set - L1, L2, L3, Earth and Neutral): 5kg

For more information on our 150mm cable please contact [email protected]

32A Three Phase Cable

32A Three Phase Cable

32A three phase cable is designed to connect the temporary power network from the generator directly to the end user.

The 32A three phase (400V) extension lead is fitted with a 32A 5 pin IP44 Mennekes plug and coupler at each end.

The cable used is 6mm 5core H07RN-F Double insulated, Ethylene Propylene Rubber, flexible cable designed to withstand; the weather, oils/greases, mechanical and thermal stresses. Conforms to BS EN 7919.

Approximate weight per metre - 0.63kg

All  cable is available to purchase or hire and can be made up in lengths ranging from 1-100M.

32A three phase cable can be terminated with IP67 plugs and couplers if required.

For more information on our 32A three  phase cable please contact [email protected]

32A Single Phase Cable

32A Single Phase Cable

32A single phase cable is designed to connect the temporary power network from the generator directly to the end user.

The 32A single phase (230V) extension lead is fitted with a 32A 3 pin IP44 Mennekes plug and coupler at each end.

The cable used is 6mm 3core H07RN-F Double insulated, Ethylene Propylene Rubber, flexible cable designed to withstand; the weather, oils/greases, mechanical and thermal stresses. Conforms to BS EN 7919.

Approximate weight per metre - 0.4kg

All 32A single phase cable is available to purchase or hire and can be made up in lengths ranging from 1-100M.

The HO7RN-F cable can be terminated with an IP67 plug and coupler if required.

For more information on our 32A single phase cable please contact [email protected]

16A Three Phase Cable

16A Three Phase Cable

16A three phase cable is designed to connect the temporary power network from the generator directly to the end user.

The 16A three phase (400V) extension lead is fitted with a 16A 5 pin IP44 Mennekes plug and coupler at each end.

The cable used is 2.5mm 5core H07RN-F Double insulated, Ethylene Propylene Rubber, flexible cable designed to withstand; the weather, oils/greases, mechanical and thermal stresses. Conforms to BS EN 7919.

Approximate weight per metre - 0.215kg

All  cable is available to purchase or hire and can be made up in lengths ranging from 1-100M.

16A three phase cable can be terminated with IP67 plugs and couplers if required.

For more information on our 16A three  phase cable please contact [email protected]

240mm Cable

240mm Cable

240mm single-core HO7RN-F  cable  terminated with powerlock ends (source and drain) or lugged ends to make connections to standby or permanent generators.

All of our 240mm cable solutions are available for purchase or hire and can be turned around quickly to support your project.

Approx weight per metre (5 wire set - L1, L2, L3, Earth and Neutral): 15kg

For more information on our 240mm cable please contact [email protected]

16A Single Phase Cable

16A Single Phase Cable

16A single phase cable is designed to connect the temporary power network from the generator directly to the end user.

The 16A single phase (230V) extension lead is fitted with a 16A 3 pin IP44 Mennekes plug and coupler at each end.

The cable used is 2.5mm 3core H07RN-F Double insulated, Ethylene Propylene Rubber, flexible cable designed to withstand; the weather, oils/greases, mechanical and thermal stresses. Conforms to BS EN 7919.

Approximate weight per metre - 0.215kg

All 16A single phase cable is available to purchase or hire and can be made up in lengths ranging from 1-100M.

For more information on our 16A single phase cable please contact [email protected]