MD1000

A 1000A Three-phase temporary mains distribution unit for use on any temporary electrical installation.

Features

A 1000A Three-phase temporary mains distribution unit for use on any temporary electrical installation. Equipment housed in a steel enclosure with rated common HDHC copper busbar system. Entire panel is fixed within a load tested 3mm galvanised mild steel crash frame with crane lifting points and integral 200mm x 115mm fork lift pockets. The frame allows bottom entry of 240mm² HO7 cables and exit of 240mm² HO7 cables, through a brush gland plate, allowing a minimum bend radius of 400mm. Internal and external copper earth bars complete with brass studs with panel clearance to allow lug on within each incoming and outgoing section. Each outgoing section is fitted with its own Multi-Function power monitor, earth leakage protection, and compartment anti-condensation heaters.

Enclosure: Fabricated from 1.4003 stainless steel with a textured powder coat finish to RAL 7021 (dark grey).Front access doors manufactured from rigid 2mm Zintec steel, fitted with door locks and door stays (Lock out at 135°). Enclosure achieves IP65 rating. Other features include integral 2mm powder coated mild steel shrouds for additional safety, compliance with Form 4 Type 3 separation, and aluminium gland plates.

Specification

Incomer: 1000A 3P+N Copper Stubs. Protection: 1000A 4 Pole (50kA) ACB

Outgoing: 3 x 400A 3P+N Copper Stubs. 400. Protection: 3 No. 400A 4 Pole (50kA) MCCB’s c/w programmable & switchable earth leakage

Dimensions and Weight

Dimensions: H2100 x W1450 x D850 (mm)

Weight: 625kg

Services and Warranty

All temporary power distribution equipment is manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification). The products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty.