MD2000

Often used to support long-term projects, our high-power distribution boards are designed to supply temporary power to a wide range of applications.

Features

Entire panel is fixed within a load tested galvanised mild steel crash frame with crane lifting points and integral 200mm x 115mm fork lift pockets. . Internal and external copper earth bars complete with brass studs with panel clearance to allow lug on within each incoming and outgoing section. Each outgoing section is fitted with its own Multi-Function power monitor, earth leakage protection, and compartment anti-condensation heaters.

Enclosure
Manufactured from rigid Zintec steel with phosphate primed welds, texture powder coated. Front access doors manufactured from rigid Zintec steel, fitted with door locks and door stays (Lock out at 135°). Enclosure achieves IP65 rating. Other features include integral 2mm powder coated mild steel shrouds for additional safety, compliance with Form 4 Type 3 separation, and aluminium gland plates.

Specification

For purchase:
> Input: 2000A 3P+N Terminals 2000A 4 Pole (50kA) ACB
> Outgoing: 6 No. 400A 3P+N Copper Stubs
> Outgoing: 6 No. 400A 4 Pole (50kA) MCCB’s c/w programmable & switchable earth leakage. (All MCB’s have C-Type trip curves. All RCD’s and RCBO’s are Type A)

For Hire:

MD2000-1

> Incomer: Max Amps 2000 – Min Amps 800

> Outgoing: 3 x 400A (min amps 160A)

MD2000-2

> Incomer: Max Amps 2000 – Min Amps 800

> Outgoing: 3 x 630A (min amps 252A)

MD2000-3

> Incomer: Max Amps 2000 – Min Amps 800

> Outgoing: 6 x 400A (min amps 320A)

Dimensions and Weight

Dimensions: H2100 x W2220 x D850 (mm)

Weight: 1200kg

Services and Warranty

All temporary power distribution equipment is manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification). The products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 24 month warranty.