Temporary Power

Made to comply with reduced low voltage regulations ensuring safe electrical supplies on site. Robust IP23 painted steel case c/w carry handles.

Double- wound design for mains isolation

Insulated drip proof portable steel case (IP23)

110v centre tapped to earth (ate) secondary winding to reduce the risk of shocks

Input terminal strip for hard wiring connecting

Input 40A DP type D MCB reducing the chance of overload

4 x output 16A 3pin sockets, 2 x output 32A 3pin sockets (BSEN 60309)

2 x 20A DP type C MCBs protecting the output 16A sockets

2 x 32A DP type C MCBs protecting the output 32A sockets

Manufactured to BSEN 61558

Power: 10kVA 1ph

Duty: Continuous

Input Voltage: 230vac 1ph

Output Voltage: 110vac 1ph

Sockets: 4 x 16A 3pin, 2 x 32A 3pin

Dimensions (mm) : H605xW440xD420

Weight: 67KG

Robust heavy duty metal case conforming to IP44 with two carry handles and mounted on skids. Finished in red and yellow.

Transformer:
> 20.0 kVA continuous rated isolating transformer,
> Primary 400 volts 3 Phase 50 / 60 Hz.
> Protected by a 32A 3 Pole MCB.
> Fitted with 2 meters of SY Flying Lead and a 63A 5 Pin CeeForm Plug.

Secondary – Sockets:
> 8 x 110 volt 16 amp 2P + E – IP44 outlets.
> Protected in pairs by 16A 2 Pole MCB’s.
> 4 x 110 volt 32 amp 2P + E – IP44 outlets.
> Protected individually by 32A 2 Pole MCB’s.

Dimensions : H: 910mm x W: 660mm x D: 630mm

Weight: 140 Kgs

110kVA three phase site power transformer designed for use on any temporary electrical installation or construction site.

The 10kVA three phase site transformer has four 110V 16A and two 32A 2P+E socket outlets with MCB protection. Fitted in a robust heavy duty case conforming to IP44 with two carry handles and mounted on skids. Finished in red with yellow front and back plates. Insulation class B, frequency 50/60Hz. High visibility enclosure ensures that the product is easily seen on site and can be relocated if required.

Specification:

• Incomer: 32A 400V 3P+N+E Plug and SY Cable Protection: 16A 3 Pole MCB
• Outgoing: 2 x 32A 230V 1P+N+E Pnl Mnt Skt. Protection: 2 x 32A 2 Pole MCB
• Outgoing: 4 x 16A 230V 1P+N+E Pnl Mnt Skt. Protection: 2 x 16A 2 Pole MCB (shared)
• Dimensions H685 x W505x D500 (mm)
• Weight 75kg

All temporary power distribution equipment is manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification). The products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty.

This 10kVA Site Power Transformer  is available to purchase or hire. For more information, please contact sales@idesystems.co.uk.