AMF400-630S-1

Three-phase auto mains fail (AMF) unit allows automatic connection of a secondary electrical supply to a load upon failure of the primary. Mechanically and electronically interlocked 4 Pole AC1 rated contactors supplying a common rated HDHC copper busbar system and load connection pads. No volt connection for remote Generator start (N/O & N/C).

Technical Information

Auxiliary power supply for Generator battery charging/jacket water heater. 3 Position key switch for Auto, Test and Generator run. Supply availability neon’s for visual representation of status. Incoming supply adjustable undervolt and time delay relays for setting of individual supply parameters. All equipment housed in a steel enclosure with internal and external brass earth bar. Complete unit mounted within a galvanised steel crash frame with forklift pockets.

Enclosure

Grey (RAL7035) textured powder coated Zintec steel construction with phosphate welds. Separate incoming and outgoing (with control gear) compartments with internal protection shrouds and external panel key lock doors. Aluminium gland plate. Assembled to IP55.

  • Input 1 (Mains): 3P + N + E (Hardwire) . Protection: 400A 4 Pole Contactor
  • Input 2 (Generator): 3P + N + E (Hardwire) . Protection: 400A 4 Pole Contactor
  • Outgoing Load: 3P + N + E (Hardwire) . Protection: N/A
  • Aux: 32A 230V 1P+N+E socket. Protection: 32A 2 Pole 30mA RCBO
  • Dimensions: H1700 x W985 x D530 (mm)
  • Weight – 206kg

All temporary power distribution equipment is manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification). The products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty.

Need advice?

Speak to one of the team on: 01543 574 111 or fill in the form below and a member of the team will get back to you.

"*" indicates required fields

Your quote list
Your quote list is empty.