Temporary Power

Understanding your temporary power distribution needs

IDE has over 25 years' experience in designing power distribution solutions. With direct access to our skilled engineers, we can help you understand and specify solutions for any event.

Optimising your temporary power distribution network

IDE supplies a full range of temporary power distribution panels from 4000A generator connections to small dual 16A sockets, and all connecting cable to ensure you optimise your temporary power network. We fit the product to the application.

Quality and safety assured

Every time any of our products leave our rental depot or manufacturing base, we test operation and safety. This includes EVERY socket, EVERY breaker, EVERY cable connection to ensure the highest reliability.

Long-term partnership

We can help you plan ahead, ensuring you get the best from your temporary power distribution set-up and our expert services. We can also manage your complete distribution fleet, or provide one stop rental management.

Event Power Distribution

Our event power distribution equipment is designed to cater for all event requirements – supporting generators, entertainment stages, PA systems, lighting, audio visual equipment and refreshment areas. We offer a range of solutions such as: event distribution boards (16A - 3200A), cabling solutions, cable ramps and changeover panels, which are available to purchase or hire from us. All of our event power distribution equipment can be manufactured to meet the requirements of your project.

  • VMD24

    63A three-phase (400V) distribution unit ideal for use within temporary electrical installations and the events…

    63A Distro

    63A three-phase (400V) distribution unit ideal for use within temporary electrical installations and the events industry. All switchgear and Tri-rated wiring is housed within a purpose built Orange plastic enclosure for high viability. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The enclosure incorporates integrated carry handles, and all necessary electrical hazard warning identification. IP44, IP67 with seals.

    • Incomer: 63A 400V 3P+N+E IP67 inlet. Protection: 63A 4 pole MCB
    • Outgoing: 1 x 63A 230V 1P+N+E IP67 Pnl Mnt Skt. Protection: 1 x 63A 2 Pole MCB
    • Outgoing: 3 x 32A 400V 3P+N+E IP44 Pnl Mnt Skt. Protection: 3 x 32A 4 Pole MCB
    • Outgoing:  6 x 32A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 3 x 32A 2Pole MCB
    • Outgoing: 6 x 16A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 3 x 16A 2 Pole MCB
    • Dimensions H600 x W415 x D415 (mm)
    • Weight 15kg

    All temporary power distribution equipment is manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification). The products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty.

  • VMD17

    A 32A Single-phase (230V) distribution unit ideal for use within temporary electrical installations and the events…

    32A Distro

    A 32A Single-phase (230V) distribution unit ideal for use within temporary electrical installations and the events industry. All switchgear and Tri-rated wiring is housed within a purpose built Orange plastic enclosure for high viability. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The enclosure incorporates integrated carry handles, and all necessary electrical hazard warning identification. Ideal for outdoor use, all socket outlets rated IP67.

    • Incomer: 32A 230V 1P+N+E IP67 1M flying lead. Protection: N/A
    • Outgoing: 3 x 32A 230V 1P+N+E IP67 Pnl Mnt Skt. Protection: N/A
    • Outgoing: 8 x 13A 230V 1P + N + E IP67 Pnl Mnt Skt. Protection: N/A
    • Dimensions H270 x W285 x D470 (mm)
    • Weight 10kg

    All temporary power distribution equipment is manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification). The products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty.

  • VMD3

    A 32A three-phase (400V) distribution board ideal for use within temporary electrical installations and the events…

    32A Power Distribution Board

    A 32A three-phase (400V) distribution board ideal for use within temporary electrical installations and the events industry. All switchgear and Tri-rated wiring is housed within a purpose built Orange plastic enclosure for high viability. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The enclosure incorporates integrated carry handles, and all necessary electrical hazard warning identification. IP44, IP67 socket outlets are available.

    Specification:

    • Incomer: 32A 400V 3P+N+E IP44Inlet. Protection: N/A
    • Outgoing: 6 x 16A 230V 1P+N+E IP44 Pnl Mnt Skt. Protection: 3 x 16A 2 Pole 30mA RCBO
    • Dimensions H270 x W285 x D470 (mm)
    • Weight 10kg

     All temporary power distribution equipment is manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification). The products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty.
    For more information on our high visibility distribution board please contact sales@idesystems.co.uk.

  • VMD2

    A 63A three-phase (400V) temporary power distribution unit designed to distribute temporary power from one area to…

    VMD2 63A Distribution Board

    A 63A three-phase (400V) temporary power distribution unit designed to distribute temporary power from one area to another. All switchgear and Tri-rated wiring is housed within a purpose built Orange plastic enclosure for high viability. Transparent windows are used to allow visual identification of the switchgear status and allow access in event of a trip. The enclosure incorporates integrated carry handles, and all necessary electrical hazard warning identification. IP44 and IP67 socket outlets are available.

    Specification:

    • Incomer: 63A 400V 3P+N+E IP67 1M flying lead. Protection: N/A
    • Outgoing: 3 x 32A 400V 3P+N+E IP44 Pnl Mnt Skt. Protection: 3 x 32A 4 Pole MCB
    • Dimensions H270 x W285 x D470 (mm)
    • Weight 10kg

    All temporary power distribution equipment is manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification). The products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty.

  • IP630S

    Three-phase inline supply/equipment protection and splitter unit for use on any temporary electrical installation.…

    IP630S

    Three-phase inline supply/equipment protection and splitter unit for use on any temporary electrical installation. Equipment housed in a polyethylene enclosure, with recessed Socket and Switchgear panels for mechanical protection. Enclosure incorporates integrated lifting handles and rails for ease of handling and stacking. External brass earth stud.

    10mm thick 300-Grade High Density Polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, impact strength of 10 kJ/m², service temperature from -50 to +80°C, with greater than 1014Ω surface resistance. IP54 Rated.

    Specification:

    • Incomer: 630A 400V 3P+N+E Powerlock drain connectors.
    • Outgoing: 2 x 630A 400V Powerlock source connectors.
    • Protection: 630A 4 pole MCCB
    • Dimensions: H450 x W550 x D495 (mm)
    • Weight: – 40kgs

    All temporary power distribution boxes are manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty.

  • IP630

    630A Three-phase inline supply/equipment protection unit for use on any temporary electrical installation. Equipment…

    IP630 distribution unit

    630A Three-phase inline supply/equipment protection unit for use on any temporary electrical installation. Equipment housed in a polyethylene enclosure, with recessed Socket and Switchgear panels for mechanical protection. Enclosure incorporates integrated lifting handles and rails for ease of handling and stacking. External brass earth stud.

    Enclosure manufactured from 10mm thick 300-Grade High Density Polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, impact strength of 10 kJ/m², service temperature from -50 to +80°C, with greater than 1014Ω surface resistance. IP54 Rated.

    Specification:

    • Incomer: 630A 400V 3P+N+E Powerlock drain connectors.
    • Outgoing: 630A 400V Powerlock source connectors.
    • Protection: 630A 4P MCCB
    • Dimensions: H450 x W550 x D495 (mm)
    • Weight: – 40kgs

    All temporary power distribution boxes are manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty.

  • IP400

    400A Three-phase inline supply/equipment protection unit for use on any temporary electrical installation. Equipment…

    IP400 distribution unit

    400A Three-phase inline supply/equipment protection unit for use on any temporary electrical installation. Equipment housed in a polyethylene enclosure, with recessed Socket and Switchgear panels for mechanical protection. Enclosure incorporates integrated lifting handles and rails for ease of handling and stacking. External brass earth stud.

    Enclosure manufactured from 10mm thick 300-Grade High Density Polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, impact strength of 10 kJ/m², service temperature from -50 to +80°C, with greater than 1014Ω surface resistance. IP54 Rated.

    Specification:

    • Incomer: 400A 400V 3P+N+E Powerlock drain connectors.
    • Outgoing: 400A 400V Powerlock source connectors.
    • Protection: 400A 4P MCCB
    • Dimensions H450 x W550 x D495 (mm)
    • Weight – 27kgs

    All temporary power distribution boxes are manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty.

  • AMF 125 Event

    Three-phase Auto Mains Fail (AMF) unit allows automatic connection of a secondary electrical supply to a load upon…

    Event Changeover Panel

    Three-phase Auto Mains Fail (AMF) unit allows automatic connection of a secondary electrical supply to a load upon failure of the primary. Mechanically and electronically interlocked AC1 rated contactors. No volt connection for remote Generator start. Auxiliary power supply for Generator battery charging or jacket water heater. 3 Position key switch for Auto, Generator run and Inhibit mains restore. Supply availability neon’s for visual representation of status. Incoming supply adjustable undervolt and time delay relays for setting of individual supply parameters. All Equipment housed in a polyethylene enclosure, with recessed Socket and Switchgear panels for mechanical protection. Enclosure incorporates integrated lifting handles and rails for ease of handling and stacking.  External brass earth studs.

    The enclosure is fabricated from 10mm thick 300-Grade High Density Polyethylene, offering good impact resistance, chemical resistance and high rigidity. Density of 0.96 g/cm³, less than 0.01% moisture absorption, impact strength of 10 kJ/m², service temperature from -50 to +80°C, with greater than 1014Ω surface resistance. IP55 Rated.

    • Input 1 (Mains): 125A 400V 5 pin IP67 inlet. Protection: 125A 4 pole contactor
    • Input 2 (Generator): 125A 400V 5 pin IP67 inlet. Protection: 125A 4 pole contactor
    • Outgoing (Load) : 125A 400V 5 pin IP67 socket. Protection: N/A
    • Aux: 16A 230V 3 Pin IP44 socket. Protection: 16A 2 Pole 30mA RCBO
    • Dimensions H600 x W550 x D495 (mm)
    • Weight – 45kgs

    All AMF changeover panels are manufactured by IDE in the UK and tested to BS 7671 (12 Months Certification) and the products used within our distribution systems conform to EN 60309, EN 60529, EN 60947 and have a 12 month warranty. For more information, please contact sales@idesystems.co.uk.

Not found what you are looking for? Fill in the form below and one of our IDE Advisors will contact you, to go through your requirement in more detail.

  • One of our friendly team members will get back to you

Your quote list
Your quote list is empty.